[WT-support] Band Data from U2R ACC ports

[HA3LN]

...fixed it's available. 
http://ha3ln.hu/usbr_option_bandmap.jpg
http://ha3ln.hu/u2r_acc_tab.jpg
http://ha3ln.hu/WT_u2r_config_acc.jpg

Yes, I duplicated the config that way. 

73!
Csaba



On 2019-05-25 1:05, Bob Wilson, N6TV wrote:> Last two screen shots give 404
error.  Not sure if I understand.
> 
> Did you check the identical boxes on Both Radio 1 and Radio 2 tabs by
using
> the "Copy 1 to 2" button in the MKSETUP dialog?
> 
> Also, active radio only switches by [ * ] key, not by pressing Shift or
> CapsLock, which only change the date ebtry6 focus, not the TX radio
(until
> you send a CW message by function key).  So it is tracking the other
radio
> I think.
> 
> 73,
> Bob, N6TV
> 
> 
> On Fri, May 24, 2019, 3:18 PM HA3LN <list at ha3ln.hu> wrote:
> 
>>
>> Sure Bob.
>>
>> Uploaded here:
>> http://ha3ln.hu/usbr_option_bandmap.jpg
>>
>> However it is interesting.
>>
>> If I check the USB router's band map values all of them comes
>> from the BIN > DECimal conversion:
>>
>> 40m: bin? 0011 / usbr> 3 and
>> 80m: bin> 0010 / usbr> 2, fair, this is what we expect.
>>
>> But if I check the usbR' "PTT & ACC" tab below, the
>> http://ha3ln.hu/u2r_acc_tab.jpg
>> ...on first shot the ABCD data display seems to be in reversed order
>> Radio1 is on 40m and radio2 on 80.
>>
>> Is there any reason for Win-Test adds +1 to the decimal values for the
>> particular band?
>> http://ha3ln.hu/WT_u2r_config_acc.jpg
>> For example for 80m column "3" how ever it is 0010 which is 2 in DEC.
>>
>>
>> It might be some reasoning behind just I cannot see right away.
>>
>>
>> 73!
>> Csaba
>>
>>
>>
>>
>>
>>
>> On 2019-05-24 19:15, Bob Wilson, N6TV wrote:> Csaba,
>>>
>>> Congrats, but you can you please post a screen shot of the Options |
>>> Bandmap dialog from the microHAM Router?  That's the critical part we
>> can't
>>> see documented anywhere.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>>
>>> On Fri, May 24, 2019 at 10:11 AM HA3LN <list at ha3ln.hu> wrote:
>>>
>>>>
>>>> Hi Bob,
>>>>
>>>> Thanks a lot for the detailed explanation.
>>>>
>>>> The user was the issue... ;-)
>>>>
>>>> I assumed the band data is available in classic SO2R mode as well.
>>>> As Larry suggested after I changed to protocol controlled started
>>>> as it should.
>>>>
>>>> Thanks again for your help as well.
>>>>
>>>> 73!
>>>> Csaba  HA3LN
>>>>
>>>>