[WT-support] Band Data from U2R ACC ports

[HA3LN]

Sure Bob.

Uploaded here:
http://ha3ln.hu/usbr_option_bandmap.jpg

However it is interesting. 

If I check the USB router's band map values all of them comes 
from the BIN > DECimal conversion:

40m: bin? 0011 / usbr> 3 and   
80m: bin> 0010 / usbr> 2, fair, this is what we expect.

But if I check the usbR' "PTT & ACC" tab below, the 
http://ha3ln.hu/u2r_acc_tab.jpg
...on first shot the ABCD data display seems to be in reversed order
Radio1 is on 40m and radio2 on 80.

Is there any reason for Win-Test adds +1 to the decimal values for the
particular band? 
http://ha3ln.hu/WT_u2r_config_acc.jpg
For example for 80m column "3" how ever it is 0010 which is 2 in DEC.


It might be some reasoning behind just I cannot see right away. 


73!
Csaba






On 2019-05-24 19:15, Bob Wilson, N6TV wrote:> Csaba,
> 
> Congrats, but you can you please post a screen shot of the Options |
> Bandmap dialog from the microHAM Router?  That's the critical part we
can't
> see documented anywhere.
> 
> 73,
> Bob, N6TV
> 
> 
> On Fri, May 24, 2019 at 10:11 AM HA3LN <list at ha3ln.hu> wrote:
> 
>>
>> Hi Bob,
>>
>> Thanks a lot for the detailed explanation.
>>
>> The user was the issue... ;-)
>>
>> I assumed the band data is available in classic SO2R mode as well.
>> As Larry suggested after I changed to protocol controlled started
>> as it should.
>>
>> Thanks again for your help as well.
>>
>> 73!
>> Csaba  HA3LN
>>
>>
>>
>>
>> On 2019-05-24 18:40, Bob Wilson, N6TV wrote:> Did you also wire a GND to
>> pins 18/19 or Shell?
>>>
>>> I had the same trouble locating a screen shot of the PTT/ACC tab in the
>>> micro2R manual, but it's in the MK2R+ manual under the ACC tab.  For
that
>>> box, you must set Pin 6 (A) to Protocol Controlled.  Do you see the
>>> equivalent?
>>>
>>> Of course the micro2R (u2r) doesn't automatically get the frequency of
>> the
>>> radio via a serial connection like the MK2R+, since it has no "Radio"
>>> option in the Ports tab, so it seems the u2R must rely on Win-Test
>> software
>>> to provide the band data.  Note that there are two settings in the
>> MKSETUP
>>> dialog, one for Radio 1 and one for Radio 2.  Maybe you need to set
both
>>> (use the Copy 1 to 2 button).
>>>
>>> I assume you're using the microHAM Control Protocol not Classic Auto
>>> Control, and have specified the correct CONTROL port to Win-Test as a
>>> MK2R/MK2R+/u2R device.
>>>
>>> Can you send us a screen shot of the Options | Bandmap settings from
the
>>> Router?  The one in my MK2R+ is based on frequency, so the one in the
u2R
>>> must be different.
>>>
>>> Note that you can use the *MON* button on the PORTS tab, next to the
>>> CONTROL port, to get a trace of commands Win-Test is sending to the
>> Router
>>> when you change bands.  Perhaps Win-Test isn't doing this right.
>>>
>>> If you still can't figure it out, please send screen shots of every
>>> relevant dialog in the Router and Win-Test.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>>
>>> On Fri, May 24, 2019 at 9:11 AM Laurent HAAS - F6FVY <f6fvy at free.fr>
>> wrote:
>>>
>>>> Hi Csaba
>>>>
>>>> Le 24/05/2019 à 17:17, HA3LN a écrit :
>>>>
>>>>> I'm trying to set up WT with U2R to provide band data on the ACC
port.
>>>>>
>>>>> According to the U2R spec I should have the BCD (A, B, C, D) on ACC
pin
>>>> 6,
>>>>> 7, 8 and 9 for radio1.
>>>>>
>>>>> I set on the "Option / MK/MKII/MK2R/u2R configuration" menu the bands
>>>> which
>>>>> is specified on the USB router option/bandmap tab.
>>>>
>>>> (snip)
>>>>
>>>> I must confess I don't have a u2R installed here, and I can't have one
>>>> easily, but :
>>>>
>>>> 1/ I'm not sure you set the outputs in the Win-Test Options /
>>>> MKI/MKII... configuration dialog *or* was it in the Microham router
>>>> application ?
>>>>
>>>> 2/ If the settings are from the Win-Test dialog, you must also enable
>>>> the "Protocol controlled" option in the Microham router (probably in
the
>>>> Acc tab, if any).
>>>>
>>>> I checked the U2R users manual (v8 - March 1st 2016) - I guess it's
the
>>>> latest - but I couldn't find any reference to the Acc part of the "PTT
&
>>>> Acc" Tab :-(
>>>>
>>>> Hope this helps.
>>>>
>>>> 73
>>>>
>>>> Larry - F6FVY
>>>>
>>>> _______________________________________________
>>>> Support mailing list
>>>> support at win-test.com
>>>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>>
>>>
>>>
>>> _______________________________________________
>>> Support mailing list
>>> support at win-test.com
>>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>
>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>