[WT-support] wtRotators

Wed Oct 24 18:27:30 CEST 2018

Chris, thanks for the explanation.  I will dig into Win10 System settings to
see what I can find.  I am very new to Win10 and, so far, I find it
not-so-very-friendly!

73, George, K5KG

------------------------

George I. Wagner

Sarasota, Florida

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Christian Verreault
Sent: Wednesday, October 24, 2018 5:48 AM
To: support at win-test.com
Subject: Re: [WT-support] wtRotators

If it start automatically on your Win7 computer that's probably because
there is an hiden script launching itself each time you turn On your
computer. 

You dont need to add this missing Dos script in Win10 because Win10 already
has everything implemented to do it for you as long as you set the
appropriate settings to do it the way you want it To be done. 

Unfortunately  I don't have access to my Win10 computer since over 8 months
and given I have a very bad memory I just cant remember for sure from wich
setting must ne implemented the launching of both the wtDXTelnet and
wtRotators. 

I think that this can be accomplished from the System settings but I can be
wrong. 

Si, I will have to check If I stilk have all the Win10 settings in my Cell
Phone and If not I Will download them in order to find where this tas must
ne programmes in the launching of Win10. 

In the me an time, go to your Windows 10 settings and try to see if you can
find a System settings. If you find setting labeled System detting or just
System, click on it and look at all the tags attaches to this setting
because there must ne something related to the startup prorocess of Wndows
10. When you're going to look at it, you will ses a list process related to
a bunch of know applications you're familliar with and if that is the case
it means that you're precisely at the right place to do what you intend to
do. Look closely at the different list displayed under each Tag. 

If I'm not wrong the name of the tag listing all the applications launched
during the boot-up of Windows 10 is titled Start-up. 

If I havent done any mistake previously and you'rexreally at the right
place, all you will have to do will be to ade the two applications among all
those already in the list. You will probably find a Modify Button visible
above the list or around the modification window plus another one under
below the list or modification window with the tag titled Save or Apply. The
first Button will have to be clicked first to allow you to Add a new
application to be launched during the Boot-up process of Win10 and once
donné the Burton lave les Save or Appli will have to be clicked at the end
of the process. 

Once you will have exited this window, you will have to reboot your computer
in order to see these modifications to take effect and if everything has
been done appropriately you will see both of your applications have already
been launched and are ready to be used. 

The only thing that could go wrong with this is that some applications
cannot be launched unless another app has already been launched previously
and is under running condition. 

In such a case, a warning message is displayed on your screen reporting that
a given application couldn't be found and at the closing of the warning
message the second application is shutt down. 

In order to avoïd such a problem, you will have to carfully read the
operation manuals for all these applications because the launching process
instructions for each of these applications is always clearly describing the
correct launching sequence for all these applications with the one which
must be launched first, then the one which must be launched in the 2nd
position followed by the 3rd one which must be launched in third position
while the first two apps are already running and the trick to make it work
is simply to place the 3 application one below the others while taking care
of the launching importance required with the most important one on top of
the ohers followed by the second one to be launched then the 3rd one finally
without taking care of the Alphabetical order. 

At least, this is the way I would do it because I think that the launching
of all the apps listed is accomplished from the one at the beginning of the
list followed by the second app listed under the first one and so on until
the application listed at the end of the list is finally launched, but I may
be wrong 

Chris VE2DR 

Télécharger Outlook for Android <https://aka.ms/ghei36>  

From: support-bounces at win-test.com <support-bounces at win-test.com> on behalf
of George I. Wagner <giwagner at k5kg.com>

Sent: Wednesday, October 24, 2018 4:00:09 AM

To: support at win-test.com

Subject: [WT-support] wtRotators 

I am using WT on a new Windows 10 computer.  When I start WT, I have to 

independently start wtDXTelnet and wtRotators.  On my old Win7 computer, 

all three programs would start automatically. 

Is there a way I can start WT, and have wtDXTelnet and wtRotators load 

automatically? 

73, George K5KG 

-- 

George Wagner, K5KG 

Sarasota, FL 

giwagner at k5kg.com 

_______________________________________________ 

Support mailing list 

support at win-test.com 

http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support 

Télécharger Outlook for Android <https://aka.ms/ghei36> 

---
This email has been checked for viruses by AVG.
https://www.avg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20181024/d913d783/attachment-0001.html>