[WT-support] WT and IC7400 can't communicate properly

[Bob Wilson, N6TV]

Congrats.

For the record, you *could* set the hex address to 66 as explained here
<http://docs.win-test.com/wiki/WT.INI#Generic_ICOM_radio> in the Wiki.

In WT.INI, under [Interfaces], add:

IcomGenericRadio1=66h

But selecting IC746pro is the better choice.

73,
Bob, N6TV

On Fri, Mar 30, 2018 at 12:55 PM, fabio.scherrer at bluewin.ch <
fabio.scherrer at bluewin.ch> wrote:

> Bob
> Many thanks for your help! It did work. In addition I had to set in WT not
> as generic Icom but as IC746pro because I realised that without the correct
> hex nr (66 h for IC7400, same as IC746pro) it cant work. By IC generic the
> hex nr isnt 66.
> 73
> Fabio HB9FAP
>
> ---- Messaggio originale ----
> Da : n6tv at arrl.net
> Data : 29/03/2018 - 08:16 (E)
> A : support at win-test.com, fabio.scherrer at bluewin.ch
> Oggetto : Re: [WT-support] WT and IC7400 can't communicate properly
>
>
> Set IC-7400 menu No. *38 CI-V Transceive* *ON *(other programs may use
> polling, so they may have turned CI-V Transceive OFF).
>
> In Win-Test Interface Configuration, check "Use CI-V Transceive" and make
> sure that "Don't Poll" is checked.
>
> 73,
> Bob, N6TV
>
> On Wed, Mar 28, 2018 at 3:56 PM, fabio.scherrer at bluewin.ch <
> fabio.scherrer at bluewin.ch> wrote:
>
>> Hi all
>> I am trying to set up WT to be used with a Icom IC7400 and a MKII of
>> Microham. They seem to communicate between them right but I dont see in the
>> WT Window Radio the frequency displayed on the IC7400. I mean by turning
>> the VFO I do not see any reaction on the VFO on radio 1 window of WT. On
>> the other side, if I write in the input field of WT whatever QRG I want to
>> QSY, it does react properly and the IC7400 changes the qrg.
>> The interface config in WT is for IC-Generic, use protcol CI-V. I checked
>> that the correct baud speed is the same for TRX and WT (9600 baud).
>> Is there anybody please who can help me to find out why I am not able to
>> let communicate properly TRX and WT?
>> MNI TNX in advance
>> 73
>> Fabio HB9FAP
>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20180330/6cadbfac/attachment.html>