[WT-support] WT and IC7400 can't communicate properly

fabio.scherrer at bluewin.ch fabio.scherrer at bluewin.ch
Fri Mar 30 21:55:26 CEST 2018

Many thanks for your help! It did work. In addition I had to set in WT not as generic Icom but as IC746pro because I realised that without the correct hex nr (66 h for IC7400, same as IC746pro) it cant work. By IC generic the hex nr isnt 66.
Fabio HB9FAP
---- Messaggio originale ----
Da : n6tv at arrl.net
Data : 29/03/2018 - 08:16 (E)
A : support at win-test.com, fabio.scherrer at bluewin.ch
Oggetto : Re: [WT-support] WT and IC7400 can't communicate properly
Set IC-7400 menu No. 38 CI-V Transceive ON (other programs may use polling, so they may have turned CI-V Transceive OFF).
In Win-Test Interface Configuration, check "Use CI-V Transceive" and make sure that "Don't Poll" is checked.
Bob, N6TV
On Wed, Mar 28, 2018 at 3:56 PM, fabio.scherrer at bluewin.ch <fabio.scherrer at bluewin.ch> wrote:
Hi all
I am trying to set up WT to be used with a Icom IC7400 and a MKII of Microham. They seem to communicate between them right but I dont see in the WT Window Radio the frequency displayed on the IC7400. I mean by turning the VFO I do not see any reaction on the VFO on radio 1 window of WT. On the other side, if I write in the input field of WT whatever QRG I want to QSY, it does react properly and the IC7400 changes the qrg.
The interface config in WT is for IC-Generic, use protcol CI-V. I checked that the correct baud speed is the same for TRX and WT (9600 baud).
Is there anybody please who can help me to find out why I am not able to let communicate properly TRX and WT?
MNI TNX in advance
Fabio HB9FAP
Support mailing list
support at win-test.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20180330/91ac287a/attachment-0001.html>

More information about the Support mailing list