[WT-support] WT and IC7400 can't communicate properly

Bob Wilson, N6TV n6tv at arrl.net
Thu Mar 29 08:16:00 CEST 2018

Set IC-7400 menu No. *38 CI-V Transceive* *ON *(other programs may use
polling, so they may have turned CI-V Transceive OFF).

In Win-Test Interface Configuration, check "Use CI-V Transceive" and make
sure that "Don't Poll" is checked.

Bob, N6TV

On Wed, Mar 28, 2018 at 3:56 PM, fabio.scherrer at bluewin.ch <
fabio.scherrer at bluewin.ch> wrote:

> Hi all
> I am trying to set up WT to be used with a Icom IC7400 and a MKII of
> Microham. They seem to communicate between them right but I dont see in the
> WT Window Radio the frequency displayed on the IC7400. I mean by turning
> the VFO I do not see any reaction on the VFO on radio 1 window of WT. On
> the other side, if I write in the input field of WT whatever QRG I want to
> QSY, it does react properly and the IC7400 changes the qrg.
> The interface config in WT is for IC-Generic, use protcol CI-V. I checked
> that the correct baud speed is the same for TRX and WT (9600 baud).
> Is there anybody please who can help me to find out why I am not able to
> let communicate properly TRX and WT?
> MNI TNX in advance
> 73
> Fabio HB9FAP
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20180328/078e608a/attachment.html>

More information about the Support mailing list