[WT-support] IC-7610 support not yet working right in Development Version

[Bob Wilson, N6TV]

wt-dev was fixed some time ago and works great with the IC-7610 IF you
switch the IC-7610 back to the default hex address and turn CI-V Transceive
ON in both.

73,
Bob, N6TV

On Thu, Apr 5, 2018, 1:03 PM Achim, DL1DAW <dl1daw at darc.de> wrote:

> Hi Bob
>
> are there any news about the configuration of IC-7610 and Win-Test?. I
> tried your proposal with the change of the CI-V adress and
>
> select IC-7851 as radio in  Win-test – but no luck! Obviously there must
> be other parameters to be set right as well.
>
> Is there any configuration available as a best practice solution? I would
> highly appreciate to get such a solution.
>
> Vy 73
>
> Achim, DL1DAW
>
> http//:www.bgkweb.de/
>
>
>
> *Von:* support-bounces at win-test.com [mailto:support-bounces at win-test.com] *Im
> Auftrag von *Bob Wilson, N6TV
> *Gesendet:* Donnerstag, 15. Februar 2018 00:21
> *An:* Win-Test Reflector
> *Betreff:* [WT-support] IC-7610 support not yet working right in
> Development Version
>
>
>
> Laurent added IC-7610 support to verison 4.28.0-dev of Win-Test, but it's
> not reading the frequency of the radio properly, and that probably won't be
> fixed until after ARRL DX CW.  You can type a frequency and press [Enter],
> and VFO A will go there OK, but even with CI-V Transceive ON, Win-Test will
> not follow the movement of the VFO.
>
>
>
> Workaround:  use the IC-7610 *SET -> Connectors -> CI-V* menu to change
> the *CI-V Address* of the IC-7610 to *8Eh* (and leave *CI-V Transceive ON*),
> then tell Win-Test 4.27 or 4.28.0-dev that the radio type is *IC-7851* instead
> of IC-7610, and it will start to work normally.
>
>
>
> Most of my Icom LUA scripts will not work however, as many still need to
> be customized for the IC-7610 command set, which is quite different than
> the 7851.  I'll be working on this soon, but probably after ARRL DX CW.
>
>
>
> Another option is to use OmniRig support.  Let me know if you need the
> corrected IC-7610.ini file for OmniRig.
>
>
> 73,
>
> Bob, N6TV
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20180405/a7fd96e0/attachment.html>