[WT-support] IC7100 CW setup

[f6ira]

  I have install your Icom script but dosent' understand how it work.
Many thanks Bob for your great work for us.
Gilles F6IRA

Le 22/04/2016 12:49, Bob Wilson, N6TV a écrit :
> The IC-7100 does not support on/off CW keying on the DTR or RTS pins 
> of the virtual serial port of the USB cable.  At present, the only 
> Icom radios that support CW via COM port DTR pin on/off keying are the 
> IC-7300, IC-7850, and IC-7851.
>
> However, you may use my *IcomPlay* LUA script in your CW messages to 
> have the radio generate all CW for you.  For example, you could 
> program your RUN messages like this:
>
>   F1:     $RSTEXCHSENT #ICOMPLAY("CQ $MYCALL $MYCALL") #ICOMCLEARRIT
>   F2:     $SETEXCHSENT #ICOMPLAY("$RST$SERIAL")
>   F3: #ICOMPLAY("$CORRECT~TU") $CR
>   F4: #ICOMPLAY("$MYCALL")
>   F5: #ICOMPLAY("$LOGGEDCALL")
>   F6: #ICOMPLAY("CL?")
>   F7: #ICOMPLAY("?")
>   Insert: #ICOMPLAY("$LOGGEDCALL$QSOB4$RST$SERIAL")
>   Plus: #ICOMPLAY("$CORRECT~TU $MYCALL") #ICOMCLEARRIT $CR
>
> First you must install my Icom scripts.  Just go to 
> http://bit.ly/wtscripts and download IcomScripts.zip.  The 
> Readme_IcomScripts.txt file inside the Zip that gives detailed 
> installation instructions.
>
> The scripts assume that the IC-7100 firmware has been updated to the 
> latest available version (1.1 or "E4").
>
> 73,
> Bob, N6TV
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20160422/914d3795/attachment.html>