[WT-support] Station Type not changable in ARI! (Tonno Vahk)

[Tonno Vahk]

That is the very problem, Bob!

 

t

 

From: rawilson at gmail.com [mailto:rawilson at gmail.com] On Behalf Of Bob Wilson, N6TV
Sent: Friday, May 01, 2015 11:37 AM
To: Win-Test Reflector; Tõnno Vähk, ES5TV
Subject: Re: [WT-support] Station Type not changable in ARI! (Tonno Vahk)

 

Ignore the "QSY" column in the Clock window, use the Alt-R (Rate) window.  Right click on it.  Select Display | Band changes elapsed times.  It displays the time since the last QSY for both Run and Mult stations.

 

Unfortunately, it doesn't seem to recognize mode changes, only band changes, so you'll have to work around that.

 

73,

Bob, N6TV

On Fri, May 1, 2015 at 12:50 AM, Tonno Vahk <tonno.vahk at gmail.com> wrote:

Hi,

I am sorry to say that it does not work properly still. The previous dev version had time counter working nicely for RUN and MULT, it just did not reset it at mode change.

Now the last version does not have any time counter at all. RUN shows /// in red all the time and no 10 minute period is counted in any way.

MULT though luckily works by saying WAIT whenever the QSY can't be made. So it does not count time but at least allows preventing early QSY.

If impossible to be fixed we will try to use it although not that easy...

73
Tonno

-----Original Message-----
From: support-bounces at f5mzn.org [mailto:support-bounces at f5mzn.org] On Behalf Of Laurent HAAS - F6FVY
Sent: Thursday, April 30, 2015 8:43 PM
To: win-test support
Subject: Re: [WT-support] Station Type not changable in ARI! (Tonno Vahk)

Hi

Le 30/04/2015 13:21, Tonno Vahk a écrit :

> Can this also be fixed so that for RUN and MULT both the 10 minute
> counter is reset by any band OR MODE change?

Check build #620.

I won't be available the next three days, so don't expect any more updates, and in case of problem, rollback to the previous build.

BTW, if Roberto I2WIJ is reading this post, the rules state :

> d) Multi-Operator stations must adhere to the 10 minutes rule (both runner and multiplier station). Only one band and one mode can be used within a 10 minutes period, while another band and mode can be used only to work a new multiplier.

I guess the rules should read :

d) Multi-Operator stations must adhere to the 10 minutes rule (both runner and multiplier station). Only one band and one mode can be used within a 10 minutes period, while another band **OR** mode can be used only to work a new multiplier.

Finally, I didn't modify the Cabrillo output to not risk any incompatibility with the current adjudication robot software. A clear description of the Cabrillo format used for the QSO: lines (especially in M/S) in the rules would be appreciated.

73

Larry - F6FVY

--
Remember Jan. 7 2015 - #JeSuisCharlie
_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support

_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20150501/068079a2/attachment.html>