[WT-support] Station Type not changable in ARI! (Tonno Vahk)

[Tonno Vahk]

Hi,

Want to say big thanks to Laurent, who spent more time the night before the contest and fixed all the bugs with ARI M/S setup in build 621. We were able to run the contest trouble free taking full advantage of WT.

73
Tonno
ES5TV

-----Original Message-----
From: support-bounces at f5mzn.org [mailto:support-bounces at f5mzn.org] On Behalf Of Laurent HAAS - F6FVY
Sent: Thursday, April 30, 2015 8:43 PM
To: win-test support
Subject: Re: [WT-support] Station Type not changable in ARI! (Tonno Vahk)

Hi

Le 30/04/2015 13:21, Tonno Vahk a écrit :

> Can this also be fixed so that for RUN and MULT both the 10 minute 
> counter is reset by any band OR MODE change?

Check build #620.

I won't be available the next three days, so don't expect any more updates, and in case of problem, rollback to the previous build.

BTW, if Roberto I2WIJ is reading this post, the rules state :

> d) Multi-Operator stations must adhere to the 10 minutes rule (both runner and multiplier station). Only one band and one mode can be used within a 10 minutes period, while another band and mode can be used only to work a new multiplier.

I guess the rules should read :

d) Multi-Operator stations must adhere to the 10 minutes rule (both runner and multiplier station). Only one band and one mode can be used within a 10 minutes period, while another band **OR** mode can be used only to work a new multiplier.

Finally, I didn't modify the Cabrillo output to not risk any incompatibility with the current adjudication robot software. A clear description of the Cabrillo format used for the QSO: lines (especially in M/S) in the rules would be appreciated.

73

Larry - F6FVY

-- 
Remember Jan. 7 2015 - #JeSuisCharlie
_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support