[WT-support] QTC Problem

Bob Wilson, N6TV n6tv at arrl.net
Mon Aug 10 18:50:37 CEST 2015


I apparently gave the wrong answer here.  Sorry.

If the log is in sync, but not the QTCs, the correct thing to do is to copy
the .WT4.QTC file, not the log file  But if the station name is in the .QTC
file, I don't know know how to correct that.

Win-Test does a pretty good job of re-synchronizing QSOs if a computer goes
down, and then comes back up.  What about QTCs?

73,
Bob, N6TV

On Sat, Aug 8, 2015 at 5:12 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> The only thing I can suggest is to copy the .WT4 file from the "good"
> computer to the "bad" one, change the station name, and restart.
>
>    1. Close Win-Test on *both computers*
>    2. Copy the .WT4 file from the good computer to the bad computer
>    3. Rename the bad log to filename.bad.wt4
>    4. Rename the good copy to match the old bad log file name (note STN1
>    or STN2 is often in the file name if you use the Win-Test defaults, so if
>    the good copy had STN1 in the name, change it to STN2)
>    5. Start Win-Test on *one and only one computer:  *the "bad" computer
>    (the one with the new log that you just renamed)
>    6. If the log auto-loads, type REOPEN [Enter] so you can get to the
>    contest configuration screen
>    7. Change the station name at the bottom to match what is being used
>    on the "bad" computer (file name should now match station name)
>    8. Click OK to reload the new copy of the log on the bad computer
>    9. Now, and only now, start Win-Test on the good computer
>
> If have no idea if this well really work, it is completely untested.
>
> 73,
> Bob, N6TV
>
> On Sat, Aug 8, 2015 at 4:45 PM, Rick Dougherty NQ4I <nq4i at contesting.com>
> wrote:
>
>> Hi All...Jim VE7ZO is operating NQ4i currently in the WAE test...he sent
>> a series of qtc's to UR5GO and midway thru the computer dumped and
>> performed a reset...when he go it back up, he now has different QTC on the
>> two networked computers...he tried to shut them down and clean start..he
>> also typed SYNC to see if the QTC would synchronize...but they will
>> not...he has different qtc's on his two networked computers..anyone have
>> any ideas how to make them equal??
>>
>> Thanks de Rick NQ4I
>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20150810/0c874b37/attachment.html>


More information about the Support mailing list