[WT-support] Recording audio (Tx and RX)

[Joe Subich, W4TV]

> If you cannot get the recording bars to move at all, you may have to
> adjust the sliders in the Audio Mixer tab of the microHAM Router
> software

This applies to XP only and may be going away soon.  In Windows 7/8
(recommended operating systems) adjust input gain in Windows Sound
Control Panel.

73,

    ... Joe, W4TV


On 1/16/2014 7:39 PM, Bob Wilson, N6TV wrote:
>     1. In the microHAM Router page, Audio Mixer tab, make sure you have set
>     USB Audio CODEC to USB Audio CODEC, and that all the little indicator bars
>     a green, as shown here:
>
>     http://docs.win-test.com/wiki/SO2R/MK2R#Device_Router_Audio_Mixer_volume_setting
>     (but make sure that "Sampling" is set to NONE)
>     2. In the top right corner of the MK2R+ box, press both the "LEFT" and
>     "RIGHT" buttons so that the "WYH" ("What You Hear") LED is lit
>     3. Start Win-Test and type MP3SETUP [Enter] in the Logging window
>     4. Set *Player* Sound device to your Windows sound card (the one
>     connected to your PC speakers)
>     5. Set *Recorder* Sound device to "USB Audio CODEC"
>     6. Set *MPEG CODEC* to Fraunhofer
>     7. Select *Stereo* recording
>     8. Select sample rate 8000 Hz, 24 kBit/s
>     9. Press *OK*
>     10. Select *Windows | Contest Recorder*
>     11. Click on the red "Start recording" button
>     12. Adjust the recording level using the two "RX LEVEL" knobs on far
>     right of the MK2R+.  Peak audio levels should never go into the "red" zone
>     in the VU meters in the Contest Recorder window.  If you cannot get the
>     recording bars to move at all, you may have to adjust the sliders in the
>     Audio Mixer tab of the microHAM Router software
>     13. After the contest, stop recording.  Move the cursor to any QSO and
>     press Ctrl+Alt+Enter (or AltGr+Enter) to listen to the recording of that
>     QSO.  Right click on the Contest Recorder window to view many more options,
>     such as Listen To -> Left/Right Channel Only, and "Extract and save QSO".
>
> 73,
> Bob, N6TV
>
> On Thu, Jan 16, 2014 at 6:29 AM, PY2SEX - Alex <py2sex at gmail.com> wrote:
>
>> Hello Folks,
>> I want to record my TX and RX with MK2R+. Does anyone has tips or a step
>> by step to make it works quickly?
>> I just over viewed the manual and I know there are informations there, but
>> would be easier if someone already did and can give me some tips. :)
>>
>> The configuration is.
>> 2 FT5000, running WT with MK2R+. Win XP running as OS.
>>
>> I would like to record the RX and TX audio from both radios.
>>
>> Any help, hints, info will be very welcome. ;)
>>
>>
>> Vy 73
>>
>> Alex
>> PY2SEX | PY1KS | DL1NX | JW/PY2SEX
>>
>
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>