[WT-support] TI5/CT1ILT Help with K3+Win-test

[Filipe Lopes]

Hi guys

just for info I think it is fixed, thanks to N6TV for precious help, as
always.




73's Filipe Lopes
CT1ILT, F4VPX, CR6K



2014-02-14 19:21 GMT+01:00 Bob Wilson, N6TV <n6tv at arrl.net>:

> On Fri, Feb 14, 2014 at 12:33 AM, Filipe Lopes <ct1ilt at gmail.com> wrote:
>
>>
>> I have changed into CW QRQ in K3 menu.
>>
>> is there anything else I should look at?
>>
>
> CW QRQ mode will go off if you turn the RIT ON.  If you don't see a little
> "+" symbol in the K3 display, QRQ mode is OFF (even if enabled in menu).
>
> As already mentioned, type NOSOUND [Enter] in the WT logging window.
>
> CONFIG:TX DLY should be set to the minimum value (8 ms).
>
> If you want to send faster than 36 WPM and use the RIT, you have to use
> Win-Test generated PTT.  WinKey generated PTT will not work.
>
> As Steef mentioned, the complete details are here:
>
> http://lists.f5mzn.org/pipermail/support/2013-November/083384.html
>
> Finally, you can increase the CW weight if you think the dots and dashes
> are too short.  Type WEIGHT [Enter] in the logging window, set value to
> 3.1, but this does not sound like your issue.
>
> 73,
> Bob, N6TV
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140214/9078b37f/attachment.html>