[WT-support] Odg.: TI5/CT1ILT Help with K3+Win-test

[pat.9a5cw@gmail.com]

Hi, try to switch USB_com adapters. Not sure if Speedswitch software can help you. Also try NOSOUND in call window.
73 9a5cw

Poslano s mog HTC uređaja

----- Reply message -----
Od: "Filipe Lopes" <ct1ilt at gmail.com>
Za: "Win-Test Reflector" <support at win-test.com>
Naslov: [WT-support]  TI5/CT1ILT Help with K3+Win-test
Datum: pet, 02. 14, 2014 09:33
Hi guys,

I am in Costa Rica and I am using a K3 with win-test and my notebook with WIN7 and when I increase speed over 34 36 WPM  the CW starts to get messy, some of the caracheters I send are almost unreadable, like C is almost Y.

I changed Keyer, was using K1EL Winkey, then I tried CW via CAT cable, and then I have my own cable with a transistor and resistor and they all do the same.

I tried unpluging the CAT system while txing with my cable keyer and still the same.

I am using all USB TO RS232 converters that work well with my TS590.

I have changed into CW QRQ in K3 menu.

is there anything else I should look at?

thanks a million for help

73's Filipe Lopes 
TI5W in ARRL CW


CT1ILT, F4VPX, CR6K
​ ​
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140214/10b5a38d/attachment.html>