[WT-support] TI5/CT1ILT Help with K3+Win-test

Carmelo Schembri it9aug at gmail.com
Fri Feb 14 16:05:40 CET 2014


Filipe, hello....improove delay time in wintest on The right corner in
configure interface......To 50 ms and try it!
If you use win keyer on winKey configuration you have also this
option.....try
Il 14/feb/2014 09:34 "Filipe Lopes" <ct1ilt at gmail.com> ha scritto:

> Hi guys,
>
> I am in Costa Rica and I am using a K3 with win-test and my notebook with
> WIN7 and when I increase speed over 34 36 WPM  the CW starts to get messy,
> some of the caracheters I send are almost unreadable, like C is almost Y.
>
> I changed Keyer, was using K1EL Winkey, then I tried CW via CAT cable, and
> then I have my own cable with a transistor and resistor and they all do the
> same.
>
> I tried unpluging the CAT system while txing with my cable keyer and still
> the same.
>
> I am using all USB TO RS232 converters that work well with my TS590.
>
> I have changed into CW QRQ in K3 menu.
>
> is there anything else I should look at?
>
> thanks a million for help
>
> 73's Filipe Lopes
> TI5W in ARRL CW
>
>
> CT1ILT, F4VPX, CR6K
>  
>
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140214/0a069c4d/attachment.html>


More information about the Support mailing list