[WT-support] Fw: Very bad CW transmission in WT 4.11 with WinKey

[SP5KP]

Hi Bob

Tks for interest oneself problem.

Im using WinKey2 USB with FT1000MP Field.

My setting from WT for WinKey -> CWweight=2

With WT 4.10 and also for WT4.11.rev Revison 525/2013/07/29  file:wt_dev_2013_07_29-20_46_48.zip
CW trnasmision is very good.

>From WT4.11.rev Revison 526/2013/08/13  file:wt_dev_2013_08_13-16_48_50.zip and present WT 4.11
CW trnasmision is very bad.

I am careful that problem is in code of programme from WT4.11.rev Revison 526/2013/08/13  

See enclosure in previous private email for you.

-----

Pozdrawiam
VY 73!

Krzysztof "Chris"
SP5KP, 3Z5W, 3Z40KP, ex SN5N 

admin portalu : http://pga-zawody.eham.pl

eMail: sp5kp at wp.pl
Skype: sp5kp.

Member of:
SPDXC#430, SPCWC#49, EPC#6350, BSCC#245

GSM: +48 603 310037



----- Original 


Message ----- 
  From: Bob Wilson, N6TV 
  To: Win-Test Reflector 
  Sent: Wednesday, November 13, 2013 7:31 PM
  Subject: Re: [WT-support] Fw: Very bad CW transmission in WT 4.11 with WinKey


  In the WinKey Configuration menu (text command shortcut:  WKSETUP [Enter]), change PTT LEAD and TAIL to 0 ms.  I think the default is 50 ms, which can make the WinKey keying sound bad.


  If you installed WT 4.11 on a new computer or wiped out your WT.INI file, the deafult of 50 ms would be used.


  Also, what type of transceiver are you using?  Elecraft K3 needs special handling.


  73,
  Bob, N6TV


  On Wed, Nov 13, 2013 at 3:34 AM, SP5KP <sp5kp at wp.pl> wrote:

    Hi

    I checked exactly - mistake appeared from version WT411.dev Revision:526/2013/08/13  

    file: wt_dev_2013_08_13-16_48_50.zip

    -----

    Pozdrawiam
    VY 73!

    Krzysztof "Chris"
    SP5KP, 3Z5W, 3Z40KP, ex SN5N 

    admin portalu : http://pga-zawody.eham.pl

    eMail: sp5kp at wp.pl
    Skype: sp5kp.

    Member of:
    SPDXC#430, SPCWC#49, EPC#6350, BSCC#245

    GSM: +48 603 310037





    ----- Original Message ----- 
    From: SP5KP 
    To: Laurent HAAS - F6FVY 
    Cc: n6tv at arrl.net 
    Sent: Wednesday, November 13, 2013 9:59 AM
    Subject: Re: Very bad CW transmission in WT 4.11 with WinKey


    Hi

    Larry, thanks for the mail and information, however I thing that problem with wrong keying in 4.11 lay in something else. 

    I am using WinKey USB http://k1el.tripod.com/wkusb.html.



    Read Enclosure



    -----

    Pozdrawiam
    VY 73!

    Krzysztof "Chris"
    SP5KP, 3Z5W, 3Z40KP, ex SN5N 

    admin portalu : http://pga-zawody.eham.pl

    eMail: sp5kp at wp.pl
    Skype: sp5kp.

    Member of:
    SPDXC#430, SPCWC#49, EPC#6350, BSCC#245

    GSM: +48 603 310037







    ----- Original Message ----- 
    From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
    To: "SP5KP" <sp5kp at wp.pl>
    Cc: <n6tv at arrl.net>
    Sent: Monday, November 11, 2013 3:20 PM
    Subject: Re: Very bad CW transmission in WT 4.11 with WinKey


    > Hi Chris
    > 
    > Le 11/11/2013 10:17, SP5KP a écrit :
    > 
    >> Since February 2012 I am using WinKey with MinTest. In version 4.10
    >> keying was good as far as weighting within range of =2 to =4
    >>
    >> Current version WT 4.11 has inproper CW keying under WinKey. This
    >> inproper keying is strongly pronounces with CWweighting =2
    > 
    > As I already explained you _SEVERAL_ _TIMES_ in private emails, the 
    > meaning of the setting is different between version 4.10 and 4.11-dev 
    > (august 2013) or later.
    > 
    > To be consistent with the all possible keyers in Win-Test (mostly 
    > "direct keying" with COM or LPT ports), the weight settings is now a 
    > Dit/Dah ratio setting. When set to 3.0, the Dah is 3 times longer that a 
    > Dit, which is the default setting. A value of 2.0 select a 1:2 ratio and 
    > 4.0 a ratio of 1:4. These two values (2.0 and 4.0) are the limits of the 
    > settings, to comply with the WinKey chip features (check the WinKey 
    > datasheet).
    > 
    > On the other hand, most of the WinKey chips on the market are integrated 
    > in devices which have their own "middleware", and can ignore the setting 
    > sent by Win-Test (eg MicroHam router).
    > 
    > To be short, set this value to 3.0, and modify it by small steps (0.1) - 
    > you can use the Up / Down arrows - to get a ratio that will fit your 
    > needs. A last note : Having such a setting distant from the 1:3 ratio 
    > will certainly keep you away from the CW Skimmer capture capabilities.
    > 
    > 73
    > 
    > Larry - F6FVY
    > 
    > -- 
    > If you're not paying for something, you're not the customer; you're the 
    > product being sold.- Andrew Lewis
    > 
    > 
    > 
    > 




------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  support at win-test.com
  http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20131113/27de5e6a/attachment-0001.html>