[WT-support] SO2R Question

[Matthias Jelen]

Hi Bob,

thanks for your answer. I´m using the MK2R+, not the u2R.

Any hints highly appreciated :-)

73,

Matthias

Am 27.07.2013 20:27, schrieb Bob Wilson, N6TV:
> Are you using a micro2R or are MK2R+?  They don't work the 
> same with Win-Test.  With the MK2R+, Win-Test has more 
> control.  It sounds like you are using a micro2R (aka U2R).
>
> With the micro2R in AUTO, headphone switching is 
> controlled according to the programming defined in the 
> Router's Audio Tab, Headphones section, not by Win-Test 
> (unless Win-Test activates stereo mode).
>
> With the micro2R, one thing that can help put Win-Test in 
> control is to /disconnect/ the PTT OUT line from the back 
> of each radio, and instead connect these PTT lines 
> directly to your amplifiers, bypassing PTT control via the 
> MK2R+.  I also recommend using "Classic" Auto control 
> under the SO2R tab so that Win-Test doesn't send any PTT 
> commands via the microHAM control protocol.  Otherwise, 
> whenever the micro2R detects computer-generated PTT, it 
> overrides the headphone switching that Win-Test wants to do.
>
> 73,
> Bob, N6TV
>
> On Sat, Jul 27, 2013 at 10:52 AM, Matthias Jelen 
> <Matthias.Jelen at gmx.de <mailto:Matthias.Jelen at gmx.de>> wrote:
>
>     Hello contesters,
>     I have a question to the SO2R experts:
>     I am struggling to get the scenario switching from
>     within Win-Test to work properly. I think it worked
>     once, but at the moment I feel that the settings from
>     the Microham Routers Function Tab override the
>     settings from Win-Test.
>     Changing radios with *, switching between "Primary
>     Radio", "Secondary Radio" and "Both" work as desired.
>     I can see the appropriate commands going to the MK2R
>     when I monitor the control port with the router.
>     Setup was done according to the pages in the Win-Test
>     wiki. I can find a remark there that the settings in
>     the functions tab are overridden from Win-Test, but
>     this doesn´t seem to be the case.
>     Can anybody please give me a hint how I can switch
>     between the settings done in the Microham Routers
>     functions tab and the scenarios in Win-Test?
>     Thanks a lot & 73,
>     Matthias, DK4YJ (@DQ4W)
>
>     _______________________________________________
>     Support mailing list
>     support at win-test.com <mailto:support at win-test.com>
>     http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130728/b7639837/attachment.html>