[WT-support] WtRotator

[Bob Wilson, N6TV]

Did you change the baud rate in the rotator or is it set to the default
(4800 baud)?  wtRotators only supports default baud rates.

Did you follow all of the set-up instructions documented
here<http://docs.win-test.com/wiki/Rotators>
?

Are you using a USB-to-Serial adapter or a real serial port?  If you are
using a Prolific USB-to-Serial adapter, it may not work.

Are you using wtRotators 1.4.1?

Are you using a straight through serial cable or a "null modem" cable or a
USB connection to the rotator box?

I don't know what you mean by "I have set the rotator on the network
because I have 2 PC's".  wtRotators should only be running on one computer,
the one with the serial connection to your DCU-1.  All Win-Test computers
on the LAN can then control the rotator by sending messages to wtRotators.

73,
Bob, N6TV

On Sun, Jan 20, 2013 at 9:49 AM, George Rebong <ke6te.9 at gmail.com> wrote:

> I set up my DCU-1 rotator and I can not get the "CON" light up on the
> small window. The"CON"lights up for a second then it goes OFF.
> The COM8 is open so that is OK, I think/?
> I have set the rotator on the network because I have 2 PC's. Did I miss
> something?
> 73
>
> --
> George Rebong
>   KE6TE
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130120/4ec9401f/attachment.html>