[WT-support] CW sending problem

[Hamad 9K2HN]

Thank you for the reply Bob, the problem starts before i tab the paddle. i
will try to change the lead and tail time to 0ms. and for rig I'm using an
ft-2000D.

Hamad
9K2HN
On Feb 1, 2013 10:56 PM, "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:

> If you tap the paddle while the WinKey is sending, or *just after* it has
> finished sending, this puts the WinKey in "halt mode" (all messages
> discarded, no more computer messages accepted), until you touch the paddle
> again.  It may help to set PTT lead and TAIL to 0 ms in the WKSETUP dialog
> (type WKSETUP [Enter] in Win-Test logging window).
>
> One reason I prefer to use WinTest COM port or LPT port keying, with a
> separate paddle connected to the internal keyer of the radio, is to avoid
> these WinKey quirks.  With some radios you can control the internal keyer
> speed via a LUA script so that it can stay in sync with the Win-Test keyer
> speed (or sends 2 WPM slower, you preference).  See
> http://bit.ly/wtscripts (K3scripts.zip).  I'm also trying to get this to
> work with newer Icom radios.
>
> What type of rig are you using?
>
> 73,
> Bob, N6TV
>
> On Fri, Feb 1, 2013 at 3:21 AM, Hamad 9K2HN <9k2hn at 9k2hn.com> wrote:
>
>> Hi,
>>
>>     I have just installed a new PC in my contest station (win7 64 Bit)
>> and all went fine except that for unknown reason some time it is stop
>> sending CW and I have to press Esc or send a dit from the Paddle then it
>> will go back to normal. Still i'm not able to find exactly what causing the
>> problem. Any one had the same problem?
>>
>> I'm using Microham Microkeyer II with the latest firmware and router.
>>
>> de 9k2hn
>> Hamad
>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130202/400cca2f/attachment.html>