[WT-support] WPX Multi-Two Serial Numbers

[Bob Wilson, N6TV]

One more important hint for operating WPX M/S or M/2 or M/M:  Use Options |
Log | Hide QSO numbers to remove the misleading "Total QSO #" column (column
1 of logging window).  Use the QSO number in the RST Sent column when giving
the exchange.

73,
Bob, N6TV

On Mon, May 9, 2011 at 10:30 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> If you are multi-two, serial numbers are by *band*, not by transmitter.
>  See http://cqwpx.com/rules.htm.
>
> At all times using Win-Test at a M/2, one station has to be set to "Run 1"
> and the other to "Run 2".  You set these by typing RUN1 [Enter] or RUN2
> [Enter] in the Win-Test logging window.  The station recording each QSO is
> indicated by R1 or R2 in the last column in the logging window.  You can
> toggle R1/R2 on any QSO by moving the cursor and pressing Alt-Y or Ctrl-F3.
>
> *If your restart Win-Test, it will not remember which computer is RUN1 or
> RUN2*, it just defaults to RUN1, and you have to type RUN2 *again* to get
> everything correct (I sure wish this could be fixed, as many users have
> trouble with this).
>
> After the contest use Tools | Check Log | 8 QSY per Hour to make sure you
> have no band change violations.
>
> 73,
> Bob, N6TV
>
>
> On Mon, May 9, 2011 at 8:49 PM, Robert Pack <nx5m at txcyber.com> wrote:
>
>>  I have look for this information but have yet to find it so perhaps
>> someone on the list can tell me how to do this and save me some time.
>> IF we were to do *multi-two* in WPX CW.....what needs to be done to keep
>> serial numbers by transmitter?
>>
>> I would appreciate any helpful information just in case.
>>
>> 73,
>> Bob NX5M
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20110509/b83f40e0/attachment.html>