[WT-support] blinking modes

[Bob Wilson, N6TV]

Manuel,

Does the Orion allow you to change the baud rate from 57600 to a lower value
like 38400 or 19200?  If so, does Auto mode work any better?  Is it only at
57600 that Auto mode doesn't work with Win-Test and the Orion?

73,
Bob, N6TV

On Sun, Mar 20, 2011 at 11:05 AM, Manuel P. <manuel.p at tin.it> wrote:

>  Yes when setting 1000 ms modes do not blinks, but cat related stuff
> "looks slow".
> This is not the solutions, but works...
> Main problem is the slight speed difference of Orion's serial port.
> Connecting Orion's to serial ports directly on pc the problem disapper, but
> not in all computers.
>
> Ciao
> Manuel
> IK3STG
>
> http://www.manuelpasquato.it
>
> ----- Original Message -----
> *From:* Bob Wilson, N6TV <n6tv at arrl.net>
> *To:* support at win-test.com
> *Sent:* Saturday, March 19, 2011 4:17 AM
> *Subject:* Re: [WT-support] blinking modes
>
> IK3STG and K4TD reported similar problems of mode changing rapidly from CW
> to SSB when using the TenTec Orion with Win-Test.  The solution was to
> change the polling rate from *Auto* to *1000* ms at the bottom of the
> Win-Test Interfaces Configuration screen.
>
> I asked NN3NW to try that and it seemed to help quite a bit.  He was using
> real serial ports COM1 and COM2 with 57600,8,N,1 on both.
>
> 73,
> Bob, N6TV
>
> On Fri, Mar 18, 2011 at 8:49 PM, <richnn3w at verizon.net> wrote:
>
>> I've rechecked everything and it still blinks.  It does it when one radio
>> is on SSB and the other radio is on CW.
>>
>> Using Wintest 4.7.0
>>
>> 73 Rich NN3W
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>  ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20110320/c2c8628c/attachment.htm