[WT-support] blinking modes

[Manuel P.]

Yes when setting 1000 ms modes do not blinks, but cat related stuff "looks slow".
This is not the solutions, but works...
Main problem is the slight speed difference of Orion's serial port.
Connecting Orion's to serial ports directly on pc the problem disapper, but not in all computers.

Ciao
Manuel
IK3STG

http://www.manuelpasquato.it

  ----- Original Message ----- 
  From: Bob Wilson, N6TV 
  To: support at win-test.com 
  Sent: Saturday, March 19, 2011 4:17 AM
  Subject: Re: [WT-support] blinking modes


  IK3STG and K4TD reported similar problems of mode changing rapidly from CW to SSB when using the TenTec Orion with Win-Test.  The solution was to change the polling rate from Auto to 1000 ms at the bottom of the Win-Test Interfaces Configuration screen.

  I asked NN3NW to try that and it seemed to help quite a bit.  He was using real serial ports COM1 and COM2 with 57600,8,N,1 on both.

  73,
  Bob, N6TV


  On Fri, Mar 18, 2011 at 8:49 PM, <richnn3w at verizon.net> wrote:

    I've rechecked everything and it still blinks.  It does it when one radio is on SSB and the other radio is on CW.

    Using Wintest 4.7.0

    73 Rich NN3W 
    _______________________________________________
    Support mailing list
    Support at win-test.com
    http://www.f5mzn.org/cgi-bin/mailman/listinfo/support






------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20110320/661c28f1/attachment.htm