[WT-support] Rotor problems

[Simon Schelkshorn]

Hi Peter,

what version of wtRotators are you using? I remember that one of the latest
versions (I will check today in the evening) did not work here either and I switched
to an older version.

vy 73
Simon, DJ4MZ

----- original Nachricht --------

Betreff: [WT-support] Rotor problems
Gesendet: Di, 23. Aug 2011
Von: Peter<pc2a at pi4cc.nl>

> Hi,
> 
> I have added RS232 rotor inferface to our controler
> This is type ERC, http://easy-rotor-control.com/ , and its in the
> supported software list.
> The inferface is working with the standard sotfware
> 
> I configure in wtRotators the interface as Hygain DCU-1
> I can manual turn the rotor with a mouse click on the popup
> 
> Within Win-test I got in wtRotators set 15M rotor to:-01 when I order to
> turn the beam in Win-test with e.g. 130 CRTL-F12
> 
> The strange thing is that de rotor readout is ok
> Even in Win-test -> windows-> rotators the readout is ok
> 
> Ofcourse is the netwerk set ok
> All tests are done on the system where the rotor interface is connected
> 
> A screen shot is at http://www.pi4cc.nl/temp/rotor.jpg
> 
> 
> Question:
> What do I wrong?
> Have someone setup an ERC with Win-test?
> 
> Peter
> PC2A
> 
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
> 

--- original Nachricht Ende ----