[WT-support] Rotor problems

[Peter]

Simon,

I guess the latest. But will check at the club this evening.
Will try to downgrade as well
Will search in the download/bin/v4 dir

Peter
PC2A
> Hi Peter,
>
> what version of wtRotators are you using? I remember that one of the
> latest
> versions (I will check today in the evening) did not work here either and
> I switched
> to an older version.
>
> vy 73
> Simon, DJ4MZ
>
> ----- original Nachricht --------
>
> Betreff: [WT-support] Rotor problems
> Gesendet: Di, 23. Aug 2011
> Von: Peter<pc2a at pi4cc.nl>
>
>> Hi,
>>
>> I have added RS232 rotor inferface to our controler
>> This is type ERC, http://easy-rotor-control.com/ , and its in the
>> supported software list.
>> The inferface is working with the standard sotfware
>>
>> I configure in wtRotators the interface as Hygain DCU-1
>> I can manual turn the rotor with a mouse click on the popup
>>
>> Within Win-test I got in wtRotators set 15M rotor to:-01 when I order to
>> turn the beam in Win-test with e.g. 130 CRTL-F12
>>
>> The strange thing is that de rotor readout is ok
>> Even in Win-test -> windows-> rotators the readout is ok
>>
>> Ofcourse is the netwerk set ok
>> All tests are done on the system where the rotor interface is connected
>>
>> A screen shot is at http://www.pi4cc.nl/temp/rotor.jpg
>>
>>
>> Question:
>> What do I wrong?
>> Have someone setup an ERC with Win-test?
>>
>> Peter
>> PC2A
>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
> --- original Nachricht Ende ----
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>