[WT-support] memory macros for the TS-590

[Steef PA2A]

Bob,

It works fine with the modified macros! I still had the old macros of 2009 in the scripts directory for the K3 and I see a lot of new macros now. We need the TS590 voice messages to be sent via the keyboard instead of pressing the rig's switches.

I would be nice to have them working together on both rigs, but for now I am happy with these modified macros.

73 's Steef PA2A


  ----- Original Message ----- 
  From: Bob Wilson, N6TV 
  To: support at win-test.com ; Steef PA2A 
  Sent: Monday, August 22, 2011 8:40 PM
  Subject: Re: [WT-support] memory macros for the TS-590


  On Mon, Aug 22, 2011 at 5:46 AM, Steef PA2A <pa2a at xs4all.nl> wrote:

    Is there a way to use the ssb voice memories of the Kenwood TS-590 via macro 's the same way as with the K3? Pressing F1 would then start the recorded message in the transceiver.


  Yes, see this post from three weeks ago.


  Just take the K3 scripts from http://bit.ly/wtscripts and modify PlayHalt.wts and PlayM1.wts to PlayM4.wts, changing one line in each, (the line with wtRadio:send command) as follows:


  PlayHalt.wts:

    wtRadio:Send("PB0;");

  PlayM1.wts:

    wtRadio:Send("PB1;");

  PlayM2.wts:

    wtRadio:Send("PB2;");

  etc.


  Note:  The TS-590 command documentation is somewhat unclear, so if PB1; doesn't work, try using PB1000; instead.


  If you can make it work, I will try to modify the K3 scripts so they will work with either the K3 or TS-590.  I have no TS-590 to test so please do try it and let me know.


  73,
  Bob, N6TV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20110823/e7916091/attachment.html>