[WT-support] Logsync & QTCs, OmniRig Alt-F4 ?

[Laurent HAAS - F6FVY]

Hi Mario

Mario Lorenz a écrit :

> Being on my next extremely busy (cough) shift on 10m, I had time to play some
> more.
> I observed that when using the TS 440 ini file, the switch
> behavior was OK. But further investigation revealed that this is
> due to the pmVfoAA/AB/BA/BB commands are defined wrong, so VFOA/B switching
> from WinTest doesnt work at all.

I digged my TS-850 from under a pile of various radio stuff, and 
installed it on my desk (oh boy, it's heavy and large !).

> Putting the correct commands (FR0;) in there and the wrong behavior is
> back. Together with my observation that by just entering the frequency
> in the callsign field I believe something must be different within
> WinTest..

Actually, we have to deal with the optional split ON or OFF when the CQ 
freq was set, the mode setting (that could have changed when running a 
mixed contest) and several other funny things...

After tracing the Ominirig code if I'm not familiar with, I found 
something that looked wrong.

I fixed it, but, as usual, my fear is having introduced side-effects for 
other radio models. The K3 behavior looks normal, but I don't own any 
other radio model.

On this occasion, I also added some small delays to prevent "stacked 
commands" when using the Omnirig add-on, especially useful with some TRX 
and various interfaces (hardware and software).

FYI, I forced a nightly build that is currently available (12-Sep-2010 
15:11 or later), even if I understand you can't test it in the middle of 
the contest ;-)

73

Larry - F6FVY