[WT-support] WT+MKII SSB message hanging

[Christian Janssen]

Hi Bob,

I use the microham DVK and the WT DVK is disabled. For PTT I use also 
the microham Control (I guess it is automatically done in WT when 
setting the COMx to microham control).

Sorry I can't you deliver screenshots now.

When I recorded the message I hit ESC just after stopping my voice.

In the router I configured COM5 to CAT and COM7 to Control. In WT I 
configured COM5 to Radio1 and COM7 to microHAM MK/MKII with default 
settings. Besides that only Ethernet is configured. All other options in 
Interfaces configuration are turned off.

I also set in WT (MK/MKII/MK2R properties): Enable the MK/MKII/MK2R 
integrated DVK.

With USB symbol I mean this one: 
http://www.pcgames.de/community/common/attached/2010/6/nikiburstr8x/hardware%20sicher%20entfernen.jpg

What happens when I transmit F1: In the router (ports tab): When sending 
the voice everything is normal. When the voice hangs up there is just 
the PTT keeping the TRX on TX and the red light near the CAT setting is 
OFF (only green os on). When going back to RX both lights are on again.

What I tried now is to use the WT DVK. Let's see how it will work. The 
MKII DVK seems to be not properly set or doesn't work at all now. I even 
had a blue screen when testing it.

73s Chris DL1MGB



Am 11.09.2010 06:01, schrieb Bob Wilson, N6TV:
> Chris,
>
> It sounds like you are using the Win-Test sound card DVK, is that
> right?  Which Sound Card did you specify to Win-Test, the one in your
> computer or the microHAM CODEC?  There are two ways to use the MKII's
> sound card:  as a Win-Test "internal DVK" sound card (record via
> Shift-F1), or as an "external microHAM DVK" (record via the DVK tab in
> the Router software).  You cannot use both at the same time.
>
> It also sounds like when you recorded the message via Shift-F1, you
> didn't hit Escape fast enough at the end of the message to terminate it
> with no "dead air time."
>
> What are you using for PTT?  COM port, microHAM control protocol?  Both?
>
> I really need to see a screen shot of everything you set-up in the
> Router and Win-Test to figure out what's going on.  What happens on the
> Ports tab when you transmit?
>
> I don't know what you mean by "The USB Symbol in the Windows bar".  Do
> you mean the microHAM router icon in the Windows task bar?
>
> 73,
> Bob, N6TV
>
> On Fri, Sep 10, 2010 at 8:13 PM, Christian Janssen <chris at dl1mgb.com
> <mailto:chris at dl1mgb.com>> wrote:
>
>     Hi,
>
>     I wonder if anyone experienced something similar. Following setup:
>
>     K3
>     MKII (with RFI mod and already some ferrites in the USB line)
>     Router 7.7.1 (just downloaded the latest version)
>     WT 4.5.1
>     HP Compaq 615 / Windows XP Professional
>
>     I recorded the SSB message (CQ) with Shift-F1. When I press F1 some
>     words were played and after that nothing more (just PTT). During this
>     time the USB symbol in the Windows bar on the bottom left disappears and
>     comes back when TRX is going on RX. This is also true for low power (10
>     Watts). It doesn't matter if the contest recorder is on or off. Also it
>     happens when the external keyboard/mouse is unplugged. When the contest
>     recorder was activated the VU meter hangs up after the unsuccessful
>     message replayand you have to Ctrl-Alt-Del WT.
>
>     Any ideas?
>
>     73s Chris DL1MGB
>
>