[WT-support] Secondary Window problem

[Yuri VE3XB]

Bob,

Thanks for the prompt reply. 

The radios send the same CW messages no matter what box on secondary window checked - Run or S/P.
Ignored S&P messages is unchecked.
The Win-Test version is 4.6.0
SO2R set to Advanced.
Adv. scenarios are Plain Pile-Up and Work mult.
Key F1.
Active radio 1 Run - secondary window Run or S/P doesn't change anything - same F1 CQ message.
Active radio 2 Run - the same
Active radio 1 S/P - F1 - my call-sign no matter what checked in secondary window.
Active radio 2 S/P - F1 - the same.

Anything else?

Thanks again,

Yuri VE3XB

  ----- Original Message ----- 
  From: Bob Wilson, N6TV 
  To: support at win-test.com 
  Sent: Thursday, October 28, 2010 12:16 AM
  Subject: Re: [WT-support] Secondary Window problem


  2010/10/27 Yuri VE3XB <ve3xb at rogers.com>
    I'm trying to set up SO2R mode but couldn't make Radio1 and Radio2 act differently - one Run and another S/P.
    With secondary window enabled clicking Run or S/P doesn't make any difference. The only command that works is CTRL - Tab but it sets the same mode for both radios.
    Switch between radios ( * ) works OK.
    I went through the archives but couldn't find anything on this issue.
    My SO2R interface is MK2R+ and the latest version of WT.
    What am I missing?
    Thanks in advance,


  What does "act differently" mean?  Send the Run messages on the Run radio and the S&P messages on the Secondary Radio?  If both are sending the same CW messages, no matter what mode you choose with Ctrl-Tab, it probably means that the "Ignored S&P messages" option is checked in the Options tab, under Modify Standard CW Messages.


  See here.


  If you're talking about phone, there is only one set of messages.  It's not the same as CW, where you have on set of messages for RUN mode and another for S&P.  So only ESM mode behaves differently when you change from RUN to S&P and you're operating on phone.


  If that's not it, please describe the problem in more detail, including the version of Win-Test that you are running, what SO2R settings you have set, which SO2R Advanced Scenario you selected, what keys you are pressing, and what you think is not working as expected.


  73,
  Bob, N6TV


------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101028/992a3601/attachment.htm