[WT-support] ESM-Mode (correction)

[KL7RA]

> if the station answers, hit <spacebar> (inserts zone) and then hit <enter> again 
> which sends your report as often as necessary. 

Should read 
if the station answers, hit <spacebar> (inserts zone) and then hit <enter> again 
 which sends your report...

73 Rich  

----- Original Message ----- 
From: "KL7RA" <kl7ra at ptialaska.net>
To: <support at win-test.com>
Sent: Monday, November 29, 2010 2:58 PM
Subject: Re: [WT-support] ESM-Mode


> >Hello, using ESM-mode : S&P  I lost some qsos, when changing frequency
> 
> Fred is correct,
> 
> I lost several mults this weekend and finally took the time to see what
> I was doing to cause it. My log is a short 80 meter entry so I'm not
> worried for score but hope I don't cause nils for the double multiplier
> on 80 meters..
> 
> How it happens:
> 
> Under tools (Data entry) 
> check on ESM enabled
> check on RUN/S&P switching
> 
> CTL TAB to flip mode to (S&P) Indicated in the logging box title bar
> (- now using the S&P CW messages and technique.)
> 
> tune dial for mults
> 
> enter a callsign in the callsign line and hit <enter>  (sends your call) as often as
> necessary
> 
> if the station answers, hit <spacebar> (inserts zone) and then hit <enter> again 
> which sends your report as often as necessary. 
> 
> if the station gets the report hit <enter> again to log.
> 
> all is well BUT if you forget to hit the second <enter> the station looks like it is
> logged okay but this entry will disappear when you tune away from that freq. 
> If you didn't notice it in time to recover the callsign then you lost that QSO and
> the station you worked gets a NIL.   
> 
> 73 Rich KL7RA  
> 
> 
> 
>  
> 
> 
> 
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support