[WT-support] WKUSB problem version 22

[Bob Wilson, N6TV]

Glad you solved the problem, but you could provide more details please, in
case someone else runs across this?

Why did it work OK with everything but Win-Test?

73,
Bob, N6TV

On Thu, Nov 18, 2010 at 10:53 AM, Karel Odehnal <odehnk at seznam.cz> wrote:

> Solved Bob!
>
> There was bad configuration in standalone mode.
>
> 73! Karel OK2ZI
>
> Bob Wilson napsal(a):
> > There is not enough detail to diagnose the apparent configuration
> problem.
> >
> > It's sounds like the Win-Test PTT line is mixed up with the CW output.
> >
> > If you can't figure it out, please send screen shots of your Win-Test
> > SETUP and microHAM ports dialogs.
> >
> > 73,
> > Bob, N6TV
> >
> > On Tue, Nov 16, 2010 at 10:46 AM, Karel Odehnal <odehnk at seznam.cz
> > <mailto:odehnk at seznam.cz>> wrote:
> >
> >
> >     Hello all,
> >
> >     I have problem with WKUSB keyer (Winkey 2 chip version 22 inside).
> >     This keyer can not work under WT. I tested him with N1MM, WKtest
> >     and few
> >     other SW with success but, not under WT.
> >
> >     (I have also microKeyer II with Winkey 1 version 10 - tested OK, MK2R
> >     with Winkey 2 version 21 - tested OK)
> >
> >     I tried to change nearly everything in WT, but without success. WT
> >     reads
> >     the speed from the pot, keys the radio, but from the paddle is
> comming
> >     only steady tone.
> >     The same is going out after F1 pressing.
> >
> >     I am totally lost with this keyer under WT. What is wrong??
> >
> >     Thanks Karel OK2ZI
> >     _______________________________________________
> >     Support mailing list
> >     Support at win-test.com <mailto:Support at win-test.com>
> >     http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101118/1d3efa00/attachment.htm