[WT-support] SWAP FREQUENCIES

[Bob Wilson, N6TV]

Ignore the second question; I see now that you ARE using WT 4.6.

On Tue, Nov 9, 2010 at 2:27 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> Paul,
>
> Is the frequency in VFO B being used by mistake?
>
> Are you using WT 4.6?  A microHAM MK2R box?  Elecraft P3?  USB-to-Serial
> converters?
>
> Some polling changes were made recently to fix some K3 timing problems.
>
> If you change the polling rate from Auto to 500 ms or more, does the
> problem still occur?
>
> If you change the radio type from Elecraft K3 to OmniRig (after installing
> OmniRig from http://www.dxatlas.com/Omnirig and configuring it for your
> COM port setup), does the problem still occur?
>
> 73,
> Bob, N6TV
>
>
> On Tue, Nov 9, 2010 at 1:39 PM, <k8po at roadrunner.com> wrote:
>
>> The swap frequencies command from the menu or ctrl-s does not work
>> properly.  For example:
>>
>> two K3's
>> Wintest 4.60
>> Contest ARRL Sweepstakes
>>
>> example 1:
>> radio 1 on 3525.0
>> radio 2 on 7060.0
>>
>> press ctrl-s
>>
>> radio 1 on 7050.0
>> radio 2 on 3525.0
>>
>> example 2:
>> radio 1 on 7060.0
>> radio 2 on 14025.0
>>
>> press ctrl-s
>>
>> radio 1 on 14025.0
>> radio 2 on 7050.0
>>
>> if you do it without changing frequencies on either radio it will toggle
>> back and forth correctly after the second try.
>>
>>
>>
>> I think it is a bug.
>>
>> 73, Paul
>>
>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101109/e3a7c4c5/attachment.htm