[WT-support] SWAP FREQUENCIES

[Bob Wilson, N6TV]

Paul,

Is the frequency in VFO B being used by mistake?

Are you using WT 4.6?  A microHAM MK2R box?  Elecraft P3?  USB-to-Serial
converters?

Some polling changes were made recently to fix some K3 timing problems.

If you change the polling rate from Auto to 500 ms or more, does the problem
still occur?

If you change the radio type from Elecraft K3 to OmniRig (after installing
OmniRig from http://www.dxatlas.com/Omnirig and configuring it for your COM
port setup), does the problem still occur?

73,
Bob, N6TV

On Tue, Nov 9, 2010 at 1:39 PM, <k8po at roadrunner.com> wrote:

> The swap frequencies command from the menu or ctrl-s does not work
> properly.  For example:
>
> two K3's
> Wintest 4.60
> Contest ARRL Sweepstakes
>
> example 1:
> radio 1 on 3525.0
> radio 2 on 7060.0
>
> press ctrl-s
>
> radio 1 on 7050.0
> radio 2 on 3525.0
>
> example 2:
> radio 1 on 7060.0
> radio 2 on 14025.0
>
> press ctrl-s
>
> radio 1 on 14025.0
> radio 2 on 7050.0
>
> if you do it without changing frequencies on either radio it will toggle
> back and forth correctly after the second try.
>
>
>
> I think it is a bug.
>
> 73, Paul
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101109/84d5fa60/attachment.htm