[WT-support] Trouble with MK2R and K2

[Bob Wilson, N6TV]

Did you set Handshake to Always OFF for both DTR and RTS in Win-Test SETUP
for the Radio COM port?  4800,N,8,2?

If that is not it, exit Win-Test, power OFF the K2, wait for the microHAM
Router frequency display to go gray, turn the K2 back on, wait for router to
display the K2's frequency, then restart Win-Test.

You may also wish to see if there is a radio type option "K2 patched" in the
Router program, similar to "K3 patched" which seems to work better with the
K3 than the "normal" K3 selection.

73,
Bob, N6TV

On Sat, Mar 20, 2010 at 5:08 AM, Luc Favre <luc-favre at orange.fr> wrote:

>  Hello everybody,
> I try to put my newly acquired MK2R into operation with my K2 and get
> trouble with the CAT connection under Wintest.
> Data flow only from the host (Wintest) to the K2 : for instance, I
> can change band from inside Wintest or enter a QRG and the K2 works
> accordingly. The right arrow on the port tab inside the MK2-Router software
> ist green.
> But from the K2 to wintest, no way : for instance changing the frequency or
> the mode opr anything else on the K2 does not change anything inside
> Wintest. And the arrow in the MK2-Router software remains grey.
> The cable is OK (I have tried with two different cables). Without the MK2,
> i.e. with a direct cable beetween Wintest and the K2 , it works fine in both
> directions.
> Any Idea ?
> Luc/F6HJO
>
>
> ------------------------------
>
> Antivirus avast! <http://www.avast.com>: message Sortant sain.
>
> Base de donnees virale (VPS) : 100320-0, 20/03/2010
> Analyse le : 20/03/2010 13:08:40
> avast! - copyright (c) 1988-2010 ALWIL Software.
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20100320/ba99a203/attachment.htm