[WT-support] again WTRotators and Windows Server 2003

[Maik Reckeweg]

Bob, Laurent, many thanks for your suggestions.

While it works on the Windows XP machine now, there is still no
communication on the PC with Windows Server 2003 operating system
installed - and this is the one where the rotators are connected...

Communication with WT-DX-Telnet works fine on this server, however.
The broadcast IP is the same throughout the network.

Any ideas ?

73
Maik DJ2QV




Hello,

i am having problems with the communication between Win-Test (4.3.0)
and WTRotators (Version 1.3)
While it works on one particular PC (running Windows XP), I can't get
it running on two others (one with WinXP , one running with Server
2003)
No matter if the internal loopback (127.255.255.255) or the broadcast
IP of the network is used.
The Wintest Software shows "turning antenna to xxx degrees" when
pressing CTRL-F12 , but the message just does not appear in the
WTRotators window.
The communication with WinTelnetDX is however working fine, so the
standard port 9871 is not blocked by a firewall or anything.

Any suggestions ?

73
Maik DJ2QV