[WT-support] RTTY ES K3

Ken Chandler g0orh at sky.com
Fri Feb 12 16:35:12 CET 2010


Dennis
Have Mitty es wt running but via VOX on the k3 not PTT.
Hopefully I can still get on CQ WW RTTY, have never ever done this  
before on the mode.
Any operating tips wud be great??

Ken..G0ORH

Sent from my iPhone




On 12 Feb 2010, at 14:18, W1UE <egan.dennis88 at gmail.com> wrote:

> Ken
>
> Several ideas:
> 1. Put your K3 into xmit mode manually.  Will it then transmit?
> 2. Do you have the correct data mode selected?  Push "DATA MD" see if
> the correct mode is selected.
> 3. If 1 and 2 both pass, then you have your PTT set incorrectly.
> MMTTY-Setup MMTTY-Tx tab, there is a drop down box to set the PTT  
> port.
>  That must agree with your FSK port.
>
> It sounds like you're getting close.
>
> Dennis W1UE
>
>
> ken chandler wrote:
>> I’m trying to run WT and a K3. I have WT & MTTY hooked up talking 
>>  to
>> each other but cannot find a way to tx, not sure wot’s the problem.
>>
>> I tried Air Link Expess and the radio does transmit in both rtty es  
>> psk.
>>
>>
>>
>> Any ideas would be great!
>>
>>
>>
>> Ken..G0ORH
>>
>>
>> --- 
>> ---------------------------------------------------------------------
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support


More information about the Support mailing list