[WT-support] Well, now it sends to 746Pro

Clive Whelan clive.whelan at btinternet.com
Thu Oct 22 20:10:25 CEST 2009


Matthias


Yes v4.2, everything is fine with transceive OFF. Naturlich fuer mich es 
macht nichts.

73


Clive
GW3NJW

Matthias Jelen wrote:
> Clive,
>
> I used many Icom rigs, among them the IC7400 and 756PROII. All of them 
> performed very well with CI-V transceive. The band map runs *much* 
> smoother than with polling. Did you try lately with a newer version of WT?
>
> 73,
>
> Matthias
>
>   
>> I strongly recommend setting CI-V transceive to OFF. Having that on 
>> always prevented successful operation with the IC7400 (=746PRO in Eu) 
>> and also with the IC756PROIII in another logger. Presently my PROIIIs 
>> are set to transceive OFF in transceiver and WT set up and work just fine.
>>
>> 73
>>
>>
>> Clive
>> GW3NJW
>>
>> Bob Wilson, N6TV wrote:
>>  
>>
>>     
>>> The VFO A setting for Radio 1 should smoothly follow the frequency of 
>>> VFO A on the radio.
>>>
>>> Check your Radio's menu:
>>>
>>> Item #36 (CI-V Baud Rate) set to Auto (default).  Try this instead of 
>>> 19200.
>>> Item #37 (CI-V Address) set to 66h (default)
>>> Item #38 (CI-V Transceive) must be set to ON (default)
>>> Item #39 (CI-V 731 Mode) must be set to OFF (default)
>>>
>>> Push the [V/M] button to make sure you are in VFO mode, not memory mode.
>>> Push the [A/B] button to make sure that "VFO A" appears.
>>>
>>> In Win-Test SETUP make sure "Use CI-V Transceive" is checked.
>>>
>>> Do you have a CT-17 level converter between the USB-to-Serial adapter 
>>> and the CI-V jack on the radio, or are you using some other type of 
>>> level converter?
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>> On Thu, Oct 22, 2009 at 9:44 AM, Neil Shapiro <neil at neilshapiro.com 
>>> <mailto:neil at neilshapiro.com>> wrote:
>>>
>>>    But it doesn't seem to receive. Bob's suggestion of typing a frequency
>>>    seemed to get the thing working in at least one direction. I can now
>>>    type a frequency and the 746Pro will change to that frequency. But If
>>>    I change the frequency on the 746Pro the VFO setting in the Radio 1
>>>    window does not reflect that change, Weird thing now is I can get this
>>>    send-only to work in a few settings. Right now it is DTR ON, RTS OFF,
>>>    19,200, 8-N-1, CI-V ON, AUTO Poll. But it also seemed to work with
>>>    both DTR and CTS ON. Maybe, bearing in mind I have had this program
>>>    less than 24 hours, I just don't understand what it is supposed to
>>>    do???
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Support mailing list
>>> Support at win-test.com
>>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>  
>>>    
>>>
>>>       
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>  
>>
>>     
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>   


More information about the Support mailing list