[WT-support] Well, now it sends to 746Pro

[Matthias Jelen]

Clive,

I used many Icom rigs, among them the IC7400 and 756PROII. All of them 
performed very well with CI-V transceive. The band map runs *much* 
smoother than with polling. Did you try lately with a newer version of WT?

73,

Matthias

>I strongly recommend setting CI-V transceive to OFF. Having that on 
>always prevented successful operation with the IC7400 (=746PRO in Eu) 
>and also with the IC756PROIII in another logger. Presently my PROIIIs 
>are set to transceive OFF in transceiver and WT set up and work just fine.
>
>73
>
>
>Clive
>GW3NJW
>
>Bob Wilson, N6TV wrote:
>  
>
>>The VFO A setting for Radio 1 should smoothly follow the frequency of 
>>VFO A on the radio.
>>
>>Check your Radio's menu:
>>
>>Item #36 (CI-V Baud Rate) set to Auto (default).  Try this instead of 
>>19200.
>>Item #37 (CI-V Address) set to 66h (default)
>>Item #38 (CI-V Transceive) must be set to ON (default)
>>Item #39 (CI-V 731 Mode) must be set to OFF (default)
>>
>>Push the [V/M] button to make sure you are in VFO mode, not memory mode.
>>Push the [A/B] button to make sure that "VFO A" appears.
>>
>>In Win-Test SETUP make sure "Use CI-V Transceive" is checked.
>>
>>Do you have a CT-17 level converter between the USB-to-Serial adapter 
>>and the CI-V jack on the radio, or are you using some other type of 
>>level converter?
>>
>>73,
>>Bob, N6TV
>>
>>On Thu, Oct 22, 2009 at 9:44 AM, Neil Shapiro <neil at neilshapiro.com 
>><mailto:neil at neilshapiro.com>> wrote:
>>
>>    But it doesn't seem to receive. Bob's suggestion of typing a frequency
>>    seemed to get the thing working in at least one direction. I can now
>>    type a frequency and the 746Pro will change to that frequency. But If
>>    I change the frequency on the 746Pro the VFO setting in the Radio 1
>>    window does not reflect that change, Weird thing now is I can get this
>>    send-only to work in a few settings. Right now it is DTR ON, RTS OFF,
>>    19,200, 8-N-1, CI-V ON, AUTO Poll. But it also seemed to work with
>>    both DTR and CTS ON. Maybe, bearing in mind I have had this program
>>    less than 24 hours, I just don't understand what it is supposed to
>>    do???
>>
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>Support mailing list
>>Support at win-test.com
>>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>  
>>    
>>
>_______________________________________________
>Support mailing list
>Support at win-test.com
>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>  
>