[WT-support] Well, now it sends to 746Pro

[Clive Whelan]

I strongly recommend setting CI-V transceive to OFF. Having that on 
always prevented successful operation with the IC7400 (=746PRO in Eu) 
and also with the IC756PROIII in another logger. Presently my PROIIIs 
are set to transceive OFF in transceiver and WT set up and work just fine.

73


Clive
GW3NJW

Bob Wilson, N6TV wrote:
> The VFO A setting for Radio 1 should smoothly follow the frequency of 
> VFO A on the radio.
>
> Check your Radio's menu:
>
> Item #36 (CI-V Baud Rate) set to Auto (default).  Try this instead of 
> 19200.
> Item #37 (CI-V Address) set to 66h (default)
> Item #38 (CI-V Transceive) must be set to ON (default)
> Item #39 (CI-V 731 Mode) must be set to OFF (default)
>
> Push the [V/M] button to make sure you are in VFO mode, not memory mode.
> Push the [A/B] button to make sure that "VFO A" appears.
>
> In Win-Test SETUP make sure "Use CI-V Transceive" is checked.
>
> Do you have a CT-17 level converter between the USB-to-Serial adapter 
> and the CI-V jack on the radio, or are you using some other type of 
> level converter?
>
> 73,
> Bob, N6TV
>
> On Thu, Oct 22, 2009 at 9:44 AM, Neil Shapiro <neil at neilshapiro.com 
> <mailto:neil at neilshapiro.com>> wrote:
>
>     But it doesn't seem to receive. Bob's suggestion of typing a frequency
>     seemed to get the thing working in at least one direction. I can now
>     type a frequency and the 746Pro will change to that frequency. But If
>     I change the frequency on the 746Pro the VFO setting in the Radio 1
>     window does not reflect that change, Weird thing now is I can get this
>     send-only to work in a few settings. Right now it is DTR ON, RTS OFF,
>     19,200, 8-N-1, CI-V ON, AUTO Poll. But it also seemed to work with
>     both DTR and CTS ON. Maybe, bearing in mind I have had this program
>     less than 24 hours, I just don't understand what it is supposed to
>     do???
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>