[WT-support] Fw: TS950SDX sub receiver freq

[Bob Wilson, N6TV]

I see nothing in RELEASE.TXT, so it is probably unchanged.  On most rigs
"Pass to VFO B" is the same thing as pass to SubRx, but it sounds like the
Kenwood TS-950SDX is unique in that respect.  That probably means it is
unlikely that this feature will ever be added.

I suggest selling your TS-950SDX and buying an Elecraft K3 (with SubRx on
VFOB). :-)  Seriously, there is no waiting list now.  It's a better receiver
too. :-)

73,
Bob, N6TV

2009/3/3 Jim Fisher <gm0nai at btinternet.com>

>  I don't think this issue has been resolved yet.
> Let me know in case I have missed a revision.
>
> 73
>
> Jim
>
> ----- Original Message ----- *From:* Jim Fisher <gm0nai at btinternet.com>
> *To:* support at win-test.com
> *Sent:* Tuesday, June 03, 2008 8:14 PM
> *Subject:* [WT-support] TS950SDX sub receiver freq
>
>  Hello all,
> When in the band map window I right click on a spot and select "Pass
> frequency to Sub VFO".
> However the frequency is transfered to the B VFO not to the Sub.
> There is only a generic Kenwood cat file so I guess this is normal on the
> other Kenwood radios without out a sub receiver.
> Can a TS950SDX file be created and the frequency be sent to the Sub
> receiver not VFO B.
> I think the FA/FB/FC at the start of the frequency command represent VFO A
> / VFO B / SUB VFO.
> So replace FB at the start of the string with FC. Can it be this simple?
>
> 73
>
> Jim
>
> GM0NAI
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090303/71c66308/attachment.htm