[WT-support] Fw: TS950SDX sub receiver freq

[Jim Fisher]

I don't think this issue has been resolved yet.
Let me know in case I have missed a revision.

73

Jim

----- Original Message ----- 
From: Jim Fisher 
To: support at win-test.com 
Sent: Tuesday, June 03, 2008 8:14 PM
Subject: [WT-support] TS950SDX sub receiver freq


Hello all,
When in the band map window I right click on a spot and select "Pass frequency to Sub VFO".
However the frequency is transfered to the B VFO not to the Sub.
There is only a generic Kenwood cat file so I guess this is normal on the other Kenwood radios without out a sub receiver.
Can a TS950SDX file be created and the frequency be sent to the Sub receiver not VFO B.
I think the FA/FB/FC at the start of the frequency command represent VFO A / VFO B / SUB VFO.
So replace FB at the start of the string with FC. Can it be this simple?

73

Jim

GM0NAI


--------------------------------------------------------------------------------


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090303/7a3afcb4/attachment-0001.htm