[WT-support] RS232 port with EZMASTER

[José Nunes CT1BOH]

Hi Oliver


I have two K3's and both can comunicate OK with Ezmaster.
I connect one radio to the COM port and the other to the RS232 port.

On Mon, Jul 20, 2009 at 5:32 PM, Olivier F5MZN <olecam at f5mzn.org> wrote:

> Hello,
>
> I think this list is the best place to get support about EZMaster...
> Sorry for the bandwidth!
>
> Is there someone around who got the RS232 port of his EZmaster to work
> with his radio? I have tried various firmwares with no lucks.
>
> It just works with the same cable inverting from the RS232 to the COM
> ports (I only have an additional Genger Changer because both DB9 of my
> serial cable and the EZMaster COM port are femele).
>
> Any help would be greatly appreciated. Thanks in anticipation!
>
> 73,
> --
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>



-- 
-- 
José Nunes
CONTEST CT1BOH - http://www.qsl.net/ct1boh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090720/433a723c/attachment.htm