[WT-support] RS232 port with EZMASTER

[F8CRH Franck]

Hi,
I use RS232 port on the rear panel of my ezmaster with K3 and there isn't
any trouble with it.

73's
Franck, F8CRH

-----Message d'origine-----
De : support-bounces at win-test.com [mailto:support-bounces at win-test.com] De
la part de Olivier F5MZN
Envoyé : lundi 20 juillet 2009 18:33
À : support at win-test.com
Objet : [WT-support] RS232 port with EZMASTER


Hello,

I think this list is the best place to get support about EZMaster... 
Sorry for the bandwidth!

Is there someone around who got the RS232 port of his EZmaster to work 
with his radio? I have tried various firmwares with no lucks.

It just works with the same cable inverting from the RS232 to the COM 
ports (I only have an additional Genger Changer because both DB9 of my 
serial cable and the EZMaster COM port are femele).

Any help would be greatly appreciated. Thanks in anticipation!

73,
-- 
Olivier / f5mzn
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support