[WT-support] SO2R Setup

Clive Whelan clive.whelan at btinternet.com
Sat Jul 11 13:08:46 CEST 2009


Hmm curious!

Clearly it is a failure of WT to command the MK2R as the hardware is
obviously OK . I'll see if I can send you my settings off list so you
can compare.

73


Clive
GW3NJW

MM0BQI wrote:
> Thanks Clive
> Yes TX focus is set to auto.  Selecting radio2 on the MK front panel allows 
> me to TX so know the hardware is working okay.  I just can't fathom what the 
> difference is between WT and N1MM setup as MM is working okay with both 
> radios.
> Have just tried following the MK setup guide again but no joy.  The guide is 
> for version 4.0.1, I am currently on the latest revison 7.2.4.
> Re. Hot keys, my laptop has the numeric keyboard printed on the keys on the 
> RHS and they are accessed by using the 'fn' key.
> 73
> Jim
>
>
>
> ----- Original Message ----- 
> From: "Clive Whelan" <clive.whelan at btinternet.com>
> To: <support at win-test.com>
> Sent: Saturday, July 11, 2009 10:18 AM
> Subject: Re: [WT-support] SO2R Setup
>
>
>   
>> Jim
>>
>> Not sure if this will help and I am at  a very early stage with WT, but
>> well versed in the art of the MK2R with N1MM as you probably know.
>>
>> I simply used the WT set up guide as downloaded by router, i.e. the mH
>> version which I tend to trust more. As you may have read I can't access
>> the hot key for switching radios, but if I invoke it from the menu then
>> the radios switch as usual ( e.g. with N1MM). I know this sounds
>> elementary but you do have the transmit focus on the MK2R set to auto do
>> you?
>>
>> If I can help further, please revert, either here or off list.
>>
>>
>> 73
>>
>>
>> Clive
>> GW3NJW
>>
>> MM0BQI wrote:
>>     
>>> Hi
>>> Can someone please point me to where the latest setup information for
>>> the MK2R is located.  I have found several different versions here and
>>> on the microHAM site none of which have solved my problem.
>>> I have the K3 as radio 1 and this is working fine.  I cannot transmit
>>> on radio 2 unless I manually select radio 2 on the MK2R.
>>> I have advanced SO2R selected and capslock binds to second radio but
>>> only radio 1 transmits.  If I swap radios the problem remains with
>>> radio 2 which cannot transmit.
>>> The same setup with two radios works okay with N1MM so it looks like I
>>> am not configuring something correctly.
>>> Need to move to Win-test as the IOTA contest mult information in
>>> Win-test will make the diference between winning and losing!
>>> Thanks and 73
>>> Jim,  MM0BQI
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Support mailing list
>>> Support at win-test.com
>>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>
>>>       
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>>     
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>   



More information about the Support mailing list