[WT-support] CW Skimmer
Winfried Kriegl DK9IP/KH7CD
dk9ip at dk9ip.de
Wed Dec 2 09:37:42 CET 2009
Hi Patrick,
when you have several instances of wtDXtelnet running with different DXclusters/Skimmers,
commands from the DXcluster window (ALT-T) in Win-Test are broadcasted to all the
wtDXtelnet instances and all connected DXclusters/Skimmers. I do also get the "command
error" from the DXcluster when sending a skimmer command but that does not cause a
disconnect from the cluster. If your cluster node disconnects on a command error try
another node. It works for me with DB0ERF-5. There is no such problem if you use the input
line of the appropriate wtDXtelnet window (command is not broadcasted to other wtDXtelnet
instances).
What bothers me when running several wtDXtelnet instances is that the configuration in
"DXcluster properties" is always applied to all the runnning wtDXtelnet windows. So if a
reconnect occurs on any wtDXtelnet window it may go to the "wrong" cluster/skimmer. You
have to manually reconfigure settings in "DXcluster properties" in every window. Would be
great if the configuration would apply to the selected wtDXtelnet window only.
73 de Win DK9IP
Patrick 9A5CW schrieb:
> Hi Bob,
> my fault ;)
> I am using wtDxTelnet last version.
> I know that i can run many wtDxTelnet on a single computer, tried that
> already b4.
> The same msg happens also here: SKIMMER/QSY command error .
> It looks like CWSkimmer telnet wants to send data to normal dxcluster,
> thats not allowed so
> dxcluster disconnects and try connect again in 30seconds.
>
> 2nd question ;)
> Any chance to share same com port used for CAT in WT and Skimmer? (with
> some virtual port?)
> Our FT1000MP have built SDR inside (mod) on 2nd VFO and i like to have
> exact freq. display.
>
> 73
>
>
>
> On Tue, Dec 1, 2009 at 6:53 PM, Bob Wilson, N6TV <n6tv at arrl.net
> <mailto:n6tv at arrl.net>> wrote:
>
> Patrick,
>
> SV1JCZ is using wtDxTelnet, not Wintelnet, so it sounds like you
> have a different issue.
>
> I am not familiar with WintelnetX. Win-Test is designed to work
> with wtDxTelnet, a different program. You can connect to both DX
> clusters and local CW Skimmers by running more than one copy of
> wtDxTelnet, on the same computer or on different computers. Each
> copy needs to be configured to use the same broadcast address and
> port number, but connect each to a different cluster or to a local
> CW Skimmer.
>
> See the FAQ
> <http://docs.win-test.com/wiki/FAQ:DX_Cluster_and_wtDxTelnet#Can_I_connect_to_more_than_one_cluster_or_to_both_CW_Skimmer_and_a_cluster.3F>.
>
> 73,
> Bob, N6TV
>
> On Tue, Dec 1, 2009 at 3:30 AM, Pete Smith <n4zr at contesting.com
> <mailto:n4zr at contesting.com>> wrote:
>
> I think part of it may be a problem with the "Routes" setup in
> WintelnetX. You need to un-check the "2-way" check box to give
> yourself full control over which devices talk to each other, and
> in what direction. I can't comment on the Win-Test aspects of
> this, though.
>
> 73, Pete N4ZR
> New Articles Daily - the Contesting Compendium at http://wiki.contesting.com <http://wiki.contesting.com/>
> The World Contest Station Database, updated daily at www.conteststations.com <http://www.conteststations.com/>
> The Reverse Beacon Network at http://reversebeacon.net <http://reversebeacon.net/>
>
>
> On 12/1/2009 4:02 AM, Patrick 9A5CW wrote:
>> Hi,
>> same problem at 9A1P with CWskimmer and wintelnet,
>> config:
>> 1st. PC - CWskimmer
>> 2nd. PC - wintelnet connected to some dxcluster + WT logging
>> 3rd. PC - 2nd wintelnet connected to CWskimmer telnet + WT
>> logging
>>
>> CWskimmer telnet tried to send spots to the internet
>> dxcluster, normal DXcluster didnt
>> allowed that, if are both on the same broadcast port. After
>> changing port for CWskimmer no more problems but no more spots
>> in WT band map window.
>>
>> Anyone tried something similar?
>>
>> Best 73, Patrik 9A5CW
>>
>> On Tue, Dec 1, 2009 at 8:57 AM, Bob Wilson, N6TV
>> <n6tv at arrl.net <mailto:n6tv at arrl.net>> wrote:
>>
>> On Sat, Nov 28, 2009 at 3:59 PM, Daniel Fourlas
>> <sv1jcz at yahoo.de <mailto:sv1jcz at yahoo.de>> wrote:
>>
>> Good morning Gentleman,
>>
>> i have some problems with CW Skimmer and Wintest.
>>
>> I make all who writes in the Manual...but i become
>> this answer from the DX
>> cluster:
>>
>> SKIMMER/QSY command error
>>
>> and this answer:
>>
>> Trying to connect to localhost
>> Disconnected
>> wtDxTelnet will try to connect again in 30 seconds ...
>>
>> Have anyone a better Manual to Install Wintest and CW
>> Skimmer?
>>
>> 73 de Daniel
>> SV1JCZ / DL1JCZ
>>
>>
>> See Connecting the Perseus SDR to CW Skimmer
>> <http://tinyurl.com/5oj88k> slide 14.
>>
>> 73,
>> Bob, N6TV
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com <mailto:Support at win-test.com>
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>>
>>
>> --
>> 9A5CW - Patrik Hrvatin
>> --... ...--
>> ------------------------------------------------------------------------
>> _______________________________________________ Support
>> mailing list Support at win-test.com
>> <mailto:Support at win-test.com>
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> Support at win-test.com <mailto:Support at win-test.com>
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com <mailto:Support at win-test.com>
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
> --
> 9A5CW - Patrik Hrvatin
> --... ...--
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
More information about the Support
mailing list