[WT-support] Splits on 40

[Bob Wilson, N6TV]

2008/10/26 Robert Pack, NX5M <nx5m at txcyber.com>

>  3.22
>

Thanks.  I opened bug report
215<http://flyspray.win-test.com/index.php?do=details&id=215>for you.
Now it is on their "to do" list.

See also bug report
159<http://flyspray.win-test.com/index.php?do=details&id=159>and bug
report bug
report 161 <http://flyspray.win-test.com/index.php?do=details&id=161>.
Looks like handling split frequency operation properly has been an issue
they've struggled with for quite some time, because every radio works
differently.

73,
Bob, N6TV

>  ----- Original Message -----
> *From:* Bob Wilson, N6TV <n6tv at arrl.net>
> *To:* support at win-test.com
> *Sent:* Sunday, October 26, 2008 9:17 PM
> *Subject:* Re: [WT-support] Splits on 40
>
> OK good, you told us everything we need to know for a bug report, except
> the version of Win-Test that you are using.
>
> 73,
> Bob, N6TV
>
> 2008/10/26 Robert Pack, NX5M <nx5m at txcyber.com>
>
>>  Let me rephrase this.  Bear with me....I am a little tired eventhough
>> this weekends CQWW effort was not a serious one.
>>
>> If the 1000D is not set to split, click on the first spot (*DR1A for
>> example) all is well.  Main VFO goes to his transmit frequency and sub VFO
>> goes to his listening frequency and split is all set up and ready to go.
>>
>> If the 1000D is still set up on split after clicking *DR1A, and I click on
>> another *type spot like *CT9P, the radio remains on the frequency that DR1A
>> was transmitting on while the sub VFO moves to the correct listening
>> frequency for CT9P.  It does not change and stay on the transmit frequency
>> of CT9P.
>>
>> If, in between the above two examples, I were to turn the split off on the
>> 1000D manually after clicking the DR1A spot, when I click on the CT9P spot
>> it works as it should.  And if I were to click on a spot that does not have
>> a split after clicking on DR1A, the radio exits split and works normally.
>> If after that I click on the CT9P spot, all works as it should.
>>
>> I just cannot go from one split frequency spot to another split frequency
>> spot....the radio does not go to the next split frequency set.
>> Let me just say that:
>> DR1A tx on 7077 and rx on 7222,  radio goes to 7077 on main for MY RX and
>> 7222 on sub for MY TX.
>> Then I click on the CT9P spot.
>> CT9P tx on 7055 and rx on 7200, radio stays on 7077 on main for MY RX and
>> 7200 for MY TX.
>> If you keep clicking on the CT9P spot, you can see 7055 pop up between the
>> clicks for a split second but will always default back to 7077....so it
>> appears to me that everything wants to default to the previous main vfo
>> frequency.
>>
>>
>> It just seems as if the main vfo will not move and stay on the second spot
>> frequency in these situations.
>>
>>  ----- Original Message -----
>> *From:* Bob Wilson, N6TV <n6tv at arrl.net>
>> *To:* support at win-test.com
>>   *Sent:* Sunday, October 26, 2008 8:26 PM
>> *Subject:* Re: [WT-support] Splits on 40
>>
>> So if you turn off split, then start clicking, Win-Test will work fine for
>> the rest of the contest, whether you click on split spots or not, right?
>>
>> The only thing that matters is the state of the radio the *first* time
>> you click on a split spot, right?  Split has to be OFF at that time.  From
>> that point forward, it all works OK?
>>
>> 73,
>> Bob, N6TV
>>
>> 2008/10/26 Robert Pack, NX5M <nx5m at txcyber.com>
>>
>>>  Yes, it works fine as long as split is turned off on the radio.
>>> Just cannot click on a spot that has a split IF the radio is already on
>>> split.
>>>
>>> I did note that I can see the correct frequency show up if you keep
>>> clicking but it just will not stay there.
>>>
>>>
>>>  ----- Original Message -----
>>> *From:* Bob Wilson, N6TV <n6tv at arrl.net>
>>> *To:* support at win-test.com
>>>  *Sent:* Sunday, October 26, 2008 6:09 PM
>>> *Subject:* Re: [WT-support] Splits on 40
>>>
>>>  Does the problem go away if you turn OFF split, on the radio*, before*clicking on a spot?
>>>
>>> 2008/10/26 SHANE BRADY <tuffyb1 at verizon.net>
>>>
>>>>  My Yaesu FT920 did the same thing.  Needs the bug to be fixed.
>>>>
>>>> WB2WPM
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20081026/16c1a898/attachment.htm