[WT-support] FT857D + NAVIGATOR INTERFACE + WT

[Manuel Wilches]

Many thanks for the generous replies of everyone.
I will try the suggested actions and will return with results.
73
Manuel
LU5OM
CT4IK
  ----- Original Message ----- 
  From: Bob Wilson, N6TV 
  To: support at win-test.com 
  Sent: Friday, November 21, 2008 12:37 AM
  Subject: Re: [WT-support] FT857D + NAVIGATOR INTERFACE + WT


  As Larry says, you probably don't need LPT checked.

  Assuming you are using this device, it appears to have a K1EL Winkey inside, so you need to tell Win-Test which virtual COM port has the WinKey.

  In Win-Test SETUP, select "WinKey" from the appropriate COM port drop-down list, then press the [Configure ...] button, and press the [Wnkey default settings] button to set the proper baud rate, then press [OK].  You may not need to specify a PTT COM port for CW as this is usually handled by the WinKey.

  After that, you may wish to do WKSETUP [Enter] to set the rest of the Winkey options.

  73,
  Bob, N6TV


  On Thu, Nov 20, 2008 at 5:22 PM, Laurent HAAS - F6FVY <f6fvy at free.fr> wrote:

    Hi Manuel

    Manuel Wilches a écrit :


    > I have the above equipment and software.


    (snip)


    > COM6 - Other interface - 9600-8-N1-CW PTT
    > PRINTER PORTS LPT ticked


    You have to _choose_ between the LPT port _or_ the COM6 port for the CW
    and PTT ouputs, but don't check both...

    73

    Larry - F6FVY




------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20081121/74d15f8a/attachment.htm