[WT-support] WT & EZmaster

[Manuel P.]

Hello Oliver, winkey is disabled on my configuration now.
I think it should be a problem on ten tec communication protocol.
Soon I will analyze serial communication on virtual com port.
I will send my test report.

73
Manuel
IK3STG


----- Original Message ----- 
From: "Olivier F5MZN" <olecam at f5mzn.org>
To: <support at win-test.com>
Sent: Thursday, July 31, 2008 10:13 PM
Subject: Re: [WT-support] WT & EZmaster




Manuel P. a écrit :
> Hello all, I'm using Wintest 3.21.0 on EZMaster usb virtual serial port,
two
> radios connected on cat ports of ezmaster and selected advanced SO2R
> technique.
> Everything looks working ok but in mixed mode contest (such as ARI DX
> international) I cannot use different mode on radio 1 and 2 (Radio 1 cw -
> Radio 2 ssb).
> They switch on software about every second but stay on radio.
> Any info ?

Hi Manuel,

I used my EZMaster (firmware 1.40) during the IOTA contest in mixed mode
and I did not notice any problem when the two radios were on differerent
modes. I used the internal keyer (with RTS and DTR for CW and PTT
activated on the virtual COM port the EZMaster was connected to), not
Winkey which was disabled in the EZMaster configuration dialog box.

HTH

73,
-- 
Olivier / f5mzn
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support


-- 
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.5.10/1585 - Release Date: 01/08/2008
6.39