[WT-support] New User

[Dave Sharred]

Can't really help you Andy since I have no experience of interfacing Kenwood
radio's with Dx4WIN or WT.

But I do know, that for Yaesu,  I use an interface (MicroHam USBII)   that
requires some software to be preloaded (actually included in the start up).

So I am not sure what software you are running for your interface ???

I am sure , if it is a common problem someone else will advise


73

Dave
G3NKC // MD4K
  -----Original Message-----
  From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]On
Behalf Of Andrew Hewitt
  Sent: 02 October 2007 11:12
  To: WIN TEST
  Subject: [WT-support] New User


  I have just subscribed to WinTest and I'm trying to get it set up. Mostly
it is working OK, I have some minor difficulties but most are resolved,
except, so far, one. This is that the CAT configuration settings do not
remain saved. If I exit from the prog and switch off the PC, or just go over
to a different logging program (DX4Win) when I return to play with WinTest
it will not talk to the rigs. Opening up OPTIONS/CONFIGURE INTERFACES the
port boxes will no longer be ticked and all the settings will be gone. I
have just been setting up the Telnet connection that took a while and
everything was fine. The rigs and PC were talking to each other, a bit slow
but on speaking terms!



  Rig no1 is a TS950SDX and rig no2 is a TS570sdg

  The PC is Dell Dimension E520 2.7Gig, 245G HD, 1024 RAM running Windows XP
media centre SP2.



  I don't have this problem with DX4Win, MixW or any other of the various
progs I use or have tried.

  Some advice would be appreciated.

  73

  Andy G3SVD
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20071002/61fd88a9/attachment.htm