[WT-support] New User

[Andrew Hewitt]

I have just subscribed to WinTest and I'm trying to get it set up. Mostly it
is working OK, I have some minor difficulties but most are resolved, except,
so far, one. This is that the CAT configuration settings do not remain
saved. If I exit from the prog and switch off the PC, or just go over to a
different logging program (DX4Win) when I return to play with WinTest it
will not talk to the rigs. Opening up OPTIONS/CONFIGURE INTERFACES the port
boxes will no longer be ticked and all the settings will be gone. I have
just been setting up the Telnet connection that took a while and everything
was fine. The rigs and PC were talking to each other, a bit slow but on
speaking terms!

 

Rig no1 is a TS950SDX and rig no2 is a TS570sdg

The PC is Dell Dimension E520 2.7Gig, 245G HD, 1024 RAM running Windows XP
media centre SP2.

 

I don't have this problem with DX4Win, MixW or any other of the various
progs I use or have tried.

Some advice would be appreciated.

73

Andy G3SVD 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20071002/f0c71111/attachment.htm