[WT-support] ea9lz, help, ezmaster and wx0b sixpack control

[Jorge Taboada]

Well Fabio, I am sending you more than 20 emails to your personal email and 
I never get an answer, well I need to asking you few things more.

1.- About Antena matrix and DBS25 pin I have clear, but I need to ask you, 
as you know the sixpac control box working as this way, 10 to 160 it's 
positive, and negative wiring from power supply to sixpack control box and 
from here to sixpack antennas.
2.- As you know, I must turn off the sixpack control box, then I hope so, 
from ezmaster DBS25 I will get positive, but my question it's, wich pin it's 
negative?
3.- Few days a go, I talk to Dani 5FV and he talk me that inside the 
ezmaster there is some bridge, I must change this bridge and do the bridge 
from middle to rigth side, my questions it's this Okay? or not? now the 
bridge it's middle to left side, please let me know the correct answer to 
this questions I have and let me know if I have to do any other changes or 
not.
4.- you must know that right now I have all wiring as you says, of course 
also I have the ezmaster wiring to external 12vdc power supply, and the 
sixpack do not work at all.
5.- finally please, send me answer to my emails I were sending you to your 
personal email.

waiting yours news as soon as possible.
73s
ea9lz


>From: "HRS I4UFH" <i4ufh at hamradiosolutions.com>
>Reply-To: support at win-test.com
>To: <support at win-test.com>
>Subject: Re: [WT-support] ea9lz, help, ezmaster and wx0b sixpack control
>Date: Thu, 3 May 2007 22:54:13 +0200
>
>Hi Jorge,
>
>This a sample how to wiring you SixPAxk to EZMaster, most depend from wich
>antennas you have connected :
>
>
>About connecting EZMaster you need to wire two cables with a DB25 female
>connecting the follow pin to the SixPack port A and B.
>
>
>Antenna Matrix A DB 25             SixPack PortA
>
>Pin 1                                              Terminal strips labeled
>A10
>Pin 2                                              Terminal strips labeled
>A15
>Pin 3                                              Terminal strips labeled
>A20
>Pin 4                                              Terminal strips labeled
>A40
>Pin 5                                              Terminal strips labeled
>A80
>Pin 6                                              Terminal strips labeled
>A160
>
>Antenna Matrix B DB 25             SixPack PortB
>
>Pin 1                                              Terminal strips labeled
>B10
>Pin 2                                              Terminal strips labeled
>B15
>Pin 3                                              Terminal strips labeled
>B20
>Pin 4                                              Terminal strips labeled
>B40
>Pin 5                                              Terminal strips labeled
>B80
>Pin 6                                              Terminal strips labeled
>B160
>
>
>At this time is enough to enable in Win test in the EZMaster configuration
>menu  You need to set this check in the Radio1TX frame and after that click
>on "Copy 2 to 1" and "Copy RX to TX", this selection need to be made for
>both Radio1 and Radio2.
>
>At the end click OK.
>
>When you change band inside WT, you antenna will be selected automatically
>
>Best 73 de Fabio I4UFH
>
>

_________________________________________________________________
Moda para esta temporada. Ponte al día de todas las tendencias. 
http://www.msn.es/Mujer/moda/default.asp